Pioneer SC-LX801 Basic Manual page 64

> Specifications > Settings
Multi Zone
Make settings related to Multi-zone Connection, such as the volume for the separate room.
■ Zone 2
Setting Item Default Value
Output Level Fixed
Volume Limit Off
Power On Level Last
Bass 0 dB
Treble 0 dB
Balance 0
28
> Listening Modes > Playback Function
Setting Details
Select whether to adjust the volume on the pre-
main amplifier in the separate room or on this unit
when outputting to Zone 2.
"Fixed": Adjust on the pre-main amplifier in the
separate room
"Variable": Adjust on this unit
Set the maximum value for Zone 2 to avoid too
high volume. Select "Off" or a value between "−32
dB" and "＋17 dB".
Set the Zone 2 volume level of when this unit is
turned on. Select a value from "Last" (volume
before the unit was turned off), "− dB", and "−
81.5 dB" to "＋18.0 dB".
• You cannot set a higher value than that of
"Volume Limit".
Adjust the volume of the bass for Zone 2. Select a
value between "−10 dB" and "＋10 dB".
Adjust the volume of the treble for Zone 2. Select a
value between "−10 dB" and "＋10 dB".
Set the left-right balance for Zone 2. Select a
between "L ＋ 10" to "R ＋ 10".
■ Zone 3
Setting Item Default Value
Output Level Fixed
Volume Limit Off
Power On Level Last
Bass 0 dB
Treble 0 dB
Balance 0
> Basic Manual
Troubleshooting | Appendix
Setting Details
Select whether to adjust the volume on the pre-
main amplifier in the separate room or on this unit
when outputting to Zone 3.
"Fixed": Adjust on the pre-main amplifier in the
separate room
"Variable": Adjust on this unit
Set the maximum value for Zone 3 to avoid too
high volume. Select "Off" or a value between "−32
dB" and "＋17 dB".
Set the Zone 3 volume level of when this unit is
turned on. Select a value from "Last" (volume
before the unit was turned off), "− dB", and "−
81.5 dB" to "＋18.0 dB".
• You cannot set a higher value than that of
"Volume Limit".
Adjust the volume of the bass for Zone 3. Select a
value between "−10 dB" and "＋10 dB".
Adjust the volume of the treble for Zone 3. Select a
value between "−10 dB" and "＋10 dB".
Set the left-right balance for Zone 3. Select a
between "L ＋ 10" to "R ＋ 10".