Specifications ················································ 60 other countries. “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. HDAVI Control™ is a trademark of Panasonic Corporation. This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to Manufactured under license from Dolby Laboratories.
8) Do not install near any heat sources such as radiators, from tip-over. 60 Hz service. Insert the power cord plug as far as it following accessories are manufactured by Panasonic heat registers, stoves, or other apparatus (including 13) Unplug this apparatus during lightning storms or when will go into the wall socket.
Safety Precautions Notes (Continued) Do not display a still picture for a long time Handling the power supply cord CAUTION This causes the image to remain on the plasma screen Insert the power plug fully into the socket outlet. (If (“Image retention”).
Do not use the pedestal if it becomes warped or physically damaged. • Do not mix old and new batteries. If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic • Do not mix different battery types Dealer immediately.
Accessories/Optional Accessory Basic Connection (Continued) Example Location Connecting Antenna (To watch TV) Adjust the plasma panel to your (View from above) VHF/UHF Antenna a: 11.0 ” (277 mm) • desired angle. VHF/UHF Antenna NTSC (National Television System Committee): b: 17.5 ” (443 mm) Center of the Conventional broadcasting c: 10°...
Identifying Controls Basic Connection (Continued) AV cable connections TV controls/indicators Front of the TV Back of the TV SD card slot To use HDMI terminals USB 1/2 connector AV Equipment HDMI AV OUT Selects channels e.g. Blu-ray Disc player in sequence Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality sound.
First Time Setup First time setup screen is displayed only when the TV is turned on for the first time after the power cord is Auto channel setup (ANT/Cable setup) inserted into a wall outlet and when “Auto power on” (p. 33) is set to “No”. Select the connected Antenna in terminal Not used: Go to ANT/Cable setup...
Page 9
Check connection to the Internet VIERA CAST lets you enjoy Internet Setup is complete. Check communication with VIERA CAST server. contents on your VIERA TV. Enjoy your Panasonic VIERA TV. Connection to local network (router) failed. Ensure wireless network availability Retry Manual...
Watching TV Displays or removes the channel banner Channel Clock Information 15-2 THE NEWS 12:30 PM Basic connection (p. 11-12) ABC-HD Recall CC SAP TV-G 1080i Standard 4:3 To watch TV and other functions Station Signal Picture Sleep timer Turn power on identifier indication resolution...
Watching TV Using VIERA TOOLS (Continued) VIERA TOOLS is the easy way to access frequently-used menu items. They are displayed as shortcut icons Favorite Feature on the TV screen. Set the Favorite Feature Use the Favorite Feature Unlike a conventional menu, you can enjoy using, playing or setting a function quickly. Display VIERA TOOLS Display the SUB MENU.
Viewing with VIERA IMAGE VIEWER Insert a Media (SD card or USB flash memory) * This setting will be skipped next time unless you select “Set later” (SD card only). Set “Image viewer settings” (Media player) Select “Play image viewer now” select Slideshow: A Slideshow will start Image viewer settings...
Page 13
Viewing with VIERA IMAGE VIEWER Adjust the Picture and Audio (p. 23) Display “Photo settings” select Picture Reset to defaults (Media player) (Continued) adjust Picture mode Vivid Contrast Photo view example: Picture menu Picture menu/Audio menu (p. 32) (p. 23) 7 x 4 (28 photos) 10 x 6 (60 photos) Media Player...
TV to the Internet (see schematic below). For more details, please contact your local Panasonic dealer. Advanced wireless connection 1 Select the item and press OK If you are using the network for connecting various PCs/Laptops and want to connect the TV, you could also use a wireless router to connect the TV to the Internet (see schematic below).
Watching Videos and DVDs If you have applicable equipment connected to the TV, you can watch videos and DVDs on the TV screen. VIERA Link Setting Input Select If you connect equipment that has the “HDAVI Control” function to the TV using an HDMI cable, You can select the external equipment to access.
Displaying PC Screen on TV How to Use Menu Functions The screen of the PC connected to the unit can be displayed on the TV. Various menus allow you to set the picture, sound, and other functions so that you can enjoy watching TV You can also listen to PC sound with the audio cable connected.
Page 17
How to Use Menu Functions Menu list Menu Item Adjustments/Configurations (alternatives) Lock Locks the channels and programs. (p. 44) Menu list Closed caption Displays subtitles (Closed caption) (p. 48) Menu Item Adjustments/Configurations (alternatives) Sets the mode to select the channel with the Channel up/down button. Reset to defaults* Resets all picture adjustments to factory default settings except for “Advanced picture”.
Page 18
When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit, the system switches to 2CH audio. (When connecting to an AV amp via HDMI, you can enjoy higher sound quality.) For details about HDMI cables for connecting a Panasonic HD camcorder, read the manual for the equipment.
Page 19
Menu VIERA Link settings VIERA Link If the “ONE TOUCH PLAY” key is pressed on the remote control for a Panasonic Home theater system, the following One-touch Power on link sequence of operations is performed automatically: Power off link theater Home theater power switches On, and playback begins.
Control the theater speakers with the TV remote control. For more details on the “HDAVI Control” function, refer to p. 34 This function is available only when a Panasonic Amplifier Volume up / down or Player theater is connected.
Network Settings This is a setting for connecting to a broadband environment. Check that the Network settings are as shown below, and then start “Connection test”. Display the menu Select “Connection test” and press OK Displayed Connection test screen (It takes a while to cancel the test.) Connection test Menu Network settings...
Page 22
Network Settings (continued) Display the menu [IP setting] Manual setting Select “IP setting mode” and set to Select “IP setting mode” and set to “Manual” “Automatic” (When IP automatic acquisition in DHCP can be used) Select the item and press OK Check the specifications of the broadband router Menu select...
Lock To select the channel or the rating of the program to lock You can lock specified channels or shows to prevent children from watching objectionable content. Display the menu Select up to 7 (1-7) channels to block. These channels will be blocked regardless of the program rating. Select “Mode”...
Editing and Setting Channels The current channel settings can be changed according to your needs and reception Automatically searches and adds available channels to the memory. conditions. Select “ANT in” Select a scanning mode (p. 15) Display the menu Select “Cable” or “Antenna” Menu Auto program Or select “Not used”...
Closed Caption Input Labels Display the menu Display the menu Select “Closed caption” Select “Setup” Menu Closed caption Reset to defaults next next Menu Setup Mode Channel surf mode Analog select Digital Primary Language Digital setting select Clock ANT/Cable setup Press to exit from Input labels a menu screen...
Using Timer Recommended AV Connections The TV can automatically turn On/Off at the designated date and time. These diagrams show our recommendations of how to connect the TV unit to your various equipment. The Clock must be set before On time/Off time settings. (p. 17) For other connections, consult the instructions for each piece of equipment and its specifications.
Ratings List for Lock Technical Information “V-chip” technology enables you to lock channels or shows according to standard ratings set by the Closed Caption (CC) entertainment industry. (p. 45) For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3; U.S.
Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation Picture mode of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.) Vivid: Provides enhanced picture contrast and sharpness for viewing in a well-lit room.
Technical Information Input signal that can be displayed (Continued) * Mark: Applicable input signal for Component (Y, P ), HDMI and PC horizontal frequency (kHz) vertical frequency (Hz) COMPONENT HDMI 525 (480) / 60i 15.73 59.94 DIGITAL AUDIO OUT terminals 525 (480) /60p 31.47 59.94...
If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV).
Specifications TC-P50G25X Power Source AC 110-127 V, 60 Hz Maximum 441 W Standby condition 0.2 W Drive method AC type Aspect Ratio 16:9 50 ” class (49.9 inches measured diagonally) Visible screen size (W × H × Diagonal) 43.5 ” × 24.4 ” × 49.9 ” (1,105 mm ×...