Miele B 2312 Operating Instructions Manual page 63

Problem
The appliance
switches off during the
descaling process.
The k indicator light is
on constantly.
The k indicator light is
on constantly during
the descaling process.
The l indicator light is
on constantly.
Possible cause
The iron or the
steamer was
connected during
the descaling
process.
The water container
or contents have not
been recognised.
The water container
or contents have not
been recognised.
The steam
generator has
overheated.
Problem solving guide
Remedy
Disconnect the iron or the
steamer from the steam
connection. Switch the
appliance on again.
Remove the water container, fill
and replace it.
Rinsing or descaling could still
be taking place. Wait until the
process has finished.
Programming of the water
hardness level has not yet been
completed. Complete this
process.
If the indicator light is still on, call
Miele Service.
Insert the water container again.
Fill the water container with a
little more water and replace it.
If the indicator light is still on, call
Miele Service.
Allow the steam ironing system
to cool down. The steam ironing
system is ready to use again
when the l has gone out.
If the indicator light is still on, call
Miele Service.
63