Table of Contents
Advertisement
Menu
Item
Input
Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
Reset to
Defaults
Off Timer
Child Lock
ANT in
Channel List
Edit
Auto Tuning
Manual
Tuning
OSD Language
Side Panel
Input Labels
Banner
Display
Timeout
Playing Time
Display
Adjustments / Configurations (alternatives)
Switches to a wide view
●
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
●
Options change depending on signals
Set to the minimum level if noise occurs.
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
●
Adjust after Clock adjustment
PC sync signal type (H & V / On Green)
H & V : by the horizontal and vertical signals from your PC
On Green : by green signal from your PC
Press the OK button to reset the present PC Setup settings to the default.
Sets the time the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) (p. 13)
Locks a channel / AV input to prevent access to it (p. 27)
Selects the antenna input type (Cable / Antenna)
Skips the unwanted channels / Edits channels (p. 26)
Sets all TV channels automatically (p. 26)
Sets the TV channels manually (p. 26)
Changes language for on screen displays (English / Português / Español)
Increases the brightness of the side panel (Off / Low / Mid / High)
●
The recommended setting is "High" to prevent panel "image retention".
Labels or skips each input terminal (p. 28)
Sets how long the information banner stays on screen (p. 14)
(0 (No display) / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 seconds)
Set to "On" to display a continuous record of time spent using Game mode
every 30 mins (Off / On)
●
This function is available when "Game" is selected in "Viewing Mode" (p. 21).
●
Set to the minimum level if noise occurs
23
Advertisement
Table of Contents
