Step 4 : Settings; Inserting Or Removing Media - Panasonic DMP-BDT320 Basic Operating Instructions Manual

STEP 4 : Settings

Easy Setting
After connecting your new player for the first time
and pressing [Í], a screen for the basic settings
will appear.
Preparation
Turn on the television and select the
appropriate video input on the television.
1
Press [Í].
Setup screen appears.
Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the
unit is still consuming a small amount of
power.
2
Follow the on-screen instructions and
apply the settings.
≥ You can perform this setup anytime by selecting "Easy
Setting" in the Setup menu. ([HOME]
Settings" "System")
≥ If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then setting information on the TV such as "On-Screen
Language" is acquired by this unit.
Easy Network Setting
After completing "Easy Setting", you can perform
"Easy Network Setting".
Select "Wired" or "Wireless".
∫ "Wired" connection
Follow the on-screen instructions to apply your
connection settings.
∫ "Wireless" connection
Select "Search for wireless network" or "WPS
(PUSH button)", then follow the on-screen
instructions and apply the settings.
10
(10) VQT3V72
Inserting or removing
Playback
media
Inserting disc in the disc slot
≥ The disc will be pulled in when inserted
partially.
To eject the disc
Touch [<].
Notes
≥ When inserting a media item, ensure that it is
facing the right way up.
≥ When removing the SD card, press the centre
of the card and pull it straight out.
≥ If you connect a Panasonic product with a USB
"Setup" "Player
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
≥ Use the front USB port when you connect a
USB memory or a USB HDD. The USB port on
the rear panel is only for the Communication
Camera.