ctrlX HMI DE0015, DE0021
11.2
Commissioning video and multi-touch operation
11.2.1 Single display DE either at the control cabinet PC PR31 or PR4x
Fig. 27: Connection via the long distance interface CDI+
After switching on the control cabinet PC and the DE display, the display detects the CDI+ connection
and "RX" is shown in the lower left corner of the display. The DE device in the On-Screen menu
is provided with the standard setting CDI+ connection ("Input rx"). Thus, the video output and the
multi-touch operation are available immediately after the initial start.
Fig. 28: Connection via standard interface
After switching on the control cabinet PC and the DE display, the display detects the Displayport
connection and "DP" is shown in the lower left corner of the display. To ensure a proper function of the
video and USB connection, set the video input via the On-Screen menu on the Displayport ("Input DP").
"Home" key
"i" key
Fig.:
R911405731, Edition 03
CDI+
XETH
XETH
max. 100 m
Displayport
XDP
XUSB
•
Open On-Screen menu
•
Confirm selected menu item
•
Navigate in the menu
Brightness
Input
Video Input
Input
PIP
Input
Touch
Exit
Exit
Commissioning video and multi-touch operation
XDP
USB
XUSB
DP
HDMI
RX
37 / 52
Bosch Rexroth AG