Manual Measurements - GE Kelman Minitrans Operator's Manual

MAIN
AIN ????.?xxx
Figure 6-7: Peripheral scheduler

6.1.2 Manual Measurements

6.1.2.1 Start a Manual Measurement
Use TransConnect to start a manual measurement on the main tank. The timer
automatically counts down from 10 seconds and indicates that a manual measurement
is about to proceed. Figure 6-8 shows the relevant screens.
MAIN
MEASUREMENT IN
2019-07-30 11:21:00
MAIN
MEASUREMENT STARTED
2019-07-30 11:21:10
MAIN
>>> OK <<<
Figure 6-8: Start a manual measurement
6.1.2.2 Stop a Measurement
Use TransConnect to stop an active measurement. After any remaining oil in the
headspace drains, the product returns to Standby mode as shown in Figure 6-9.
2019-07-30 11:45:00
OIL DRAINING
2019-07-30 12:00:00
STANDBY
Figure 6-9: Stop a measurement
6.1.2.3 Measurement Data
The product automatically pages through the screens and measurement data of the last
analysis. For example, data for the main tank is shown in Figure 6-10.
MA-006- Minitrans Operator Guide - Rev 2.2
10 s
5-Mar-20 Page 15 of 26