Table of Contents
Advertisement
PRE INSTALLATION
2.5
RATING PLATES:
Each case has a 2 unique & 1 optional label that
includes an identification number.
As well as on the packaging, the case identification
number appears as a serial number on the rating plate
(most commonly located on the ceiling panel left hand
end of the case and left side rear panel) and is printed
on a decal on the rear of the case . The case sequence
number is also written on a ticket on the front panel.
PACKAGING TAG:
RATING PLATE:
PAGE 11
ASSET TAG (Where Applicable):
LOCATIONS:
Asset Tag
Rating Plate
NOTE:
Refer to rating plate to identify
the exact case model. The serial
number and build date are key for
aquiring information regarding spare
parts, warranty, short parts etc.
SMED SEMI VERTICAL - HUSSMANN
Packaging Tag (rear)
FIGURE 2C
Advertisement
Table of Contents
