Adding More Ingredients; After You Have Finished Using Your Appliance - Silvercrest SKMP 1300 D4 Operating Instructions Manual

Professional stand mixer
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 21
CAUTION! PROPERTY DAMAGE!
To prevent the appliance from being
overloaded, do not exceed the specified
maximum filling quantities.
If the appliance is labouring: switch off the
appliance, remove half of the dough and
knead each half separately.
5) Depending on what you want to do, attach the
kneading hook
the drive shaft
:
Fit the kneading hook
onto the drive shaft
metal pins on the drive shaft
recesses on the attachment
Push the attachment
the drive shaft
presses and turn the attachment anticlock-
wise a little way (towards
Let go of the attachment. It is now firmly
attached to the drive shaft
NOTE
Please note that while kneading or stirring,
the mixture in the mixing bowl
in volume or is pressed upward slightly as a
result of the movement. You should therefore
never fill the mixing bowl
top!
6) Press the release lever
the swivelling arm
with the mounted tool facing downwards.
7) Turn the rotary switch
(see the section "Functions").
24 
GB │ IE
, whisk
or beater
, whisk
or beater
so that the two
lock into the
.
firmly onto
so that the spring com-
).
.
increases
right up to the
upwards and push
into the working position
to the required level

Adding more ingredients

WARNING! RISK OF INJURY!
Never put your hand into the filling nose
during operation!
To add ingredients while the appliance is running,
open the filling nose
Slowly add more ingredients via the filling nose
to
ATTENTION! PROPERTY DAMAGE!
Do not insert objects, such as forks or spoons,
into the filling nose
If you add ingredients during operation, food
can splash out of the appliance.
After you have finished using your
appliance
1) Turn the appliance off using the rotary switch
2) Press the release lever
the swivelling arm
3) Remove the attachment
drive shaft
against the drive shaft
clockwise (towards
You can now remove the attachment.
4) Remove the lid
by turning it clockwise (towards
pulling it off.
5) Remove the mixing bowl
clockwise and then pulling it upwards.
6) Clean the appliance (see section "Cleaning
and care").
on the lid
.
!
upwards and move
to the highest position.
from the
by pushing the attachment
and turning
) at the same time.
from the swivelling arm
by turning it anti-
SKMP 1300 D4
.
.
) and

Advertisement

Table of Contents
loading

This manual is also suitable for:

297858304132

Table of Contents