Hide thumbs Also See for NVM-2000:

Advertisement

Quick Links

NVM-2000
Installing Port Cards

Advertisement

Table of Contents
loading

Summary of Contents for NEC NVM-2000

  • Page 1 NVM-2000 Installing Port Cards...
  • Page 2 No representa- tion is made that this manual is complete or accurate in all respects, and NEC America, Inc. shall not be liable for any errors or omissions.
  • Page 3: Table Of Contents

    Table of Contents Table of Contents Installing Port Cards ..............1 Introduction.
  • Page 4 Table of Contents Issue 1-0...
  • Page 5: Installing Port Cards

    LAN Card must be removed and it’s device driver disabled (see 24 Port Systems on page 8). Tools and Materials Needed An NVM-2000 Voice Mail System (with a monitor and keyboard) installed and running Port Card(s): 2-Port Card(s) (P/N 17503A) 4-Port Card(s) (P/N 17501A) NVM 2000 Device Driver Software Upgrade disk (Version 5.54)
  • Page 6: Locally Backing Up The Voice Mail Database

    Installing Port Cards Locally Backing Up the Voice Mail Database Locally Backing Up the Voice Mail Database Locally Backing Up the Voice Mail Database You should back up the current Voice Mail database as a precaution before you install a Port Card(s).
  • Page 7 Installing Port Cards Locally Backing Up the Voice Mail Database Locally Backing Up the Voice Mail Database (cont’d) Note: If you do not remove the disk in step 14, when the Voice Mail tries to reboot, the system prompts with a Non-system disk or disk error. 16.
  • Page 8: Configuring The Jumpers On Port Card(S)

    Installing Port Cards Configuring the Jumpers on Port Card(s) Configuring the Jumpers on Port Card(s) Configuring the Jumpers on Port Card(s) Depending on the number of available slots in your Voice Mail cabinet and your system software, you can install 2-Port and 4-Port Cards to provide you with the number of ports you need. A maxi- mum of 24 ports is allowed.
  • Page 9: Installing Port Card(S)

    Installing Port Cards Installing Port Card(s) Installing Port Card(s) Installing Port Card(s) WARNING Do not turn off the Voice Mail without first shutting it down. If you do not shut down first, you may corrupt the Voice Mail database when you turn it off.
  • Page 10: Installing Port Card(S)

    Installing Port Cards Installing Port Card(s) Installing Port Card(s) (cont’d) Installing Port Card(s) Slots Port Numbers 9,10 13,14 for Top Connectors Port Numbers 11,12 15,16 for Bottom Connectors LPT1 COMM 1 Modem Card DT3-V13 AC Power Connector Keyboard Connector Monitor Power Connector Figure 3: 16-Port System Slots Port Numbers...
  • Page 11: Installing The Device Driver Software

    Installing th e Device D river So ftware If your Voice Mail has software version below 6.00 (but not including version 6.00) you must install the NVM-2000 Device Driver software upgrade (v5.54). To install the device driver software: 1. The NVM 2000 Voice Mail should already be shut down, and power turned off. If not, perform steps 1 through 3 on page 5.
  • Page 12: 24 Port Systems

    Installing Port Cards 24 Port Systems 24 Port Systems 24 Port System s In order for you to install 24 ports in your Voice Mail System, the Modem Card will have to be removed and COM 2 enabled in BIOS. If a Network (LAN) Card is also installed, the LAN Card will have to be removed and its device driver disabled.
  • Page 13: Connecting The Port Card(S) To The Phone System

    Figure 5: Back View of the Voice Mail Cabinet with a Network (LAN) Card and Modem Card Installed Connecting the Port Card(s) to the Phone System Refer to the NVM-2000 System Guide (P/N 17500INS05 or higher) when connecting the Port Cards to the phone system.
  • Page 14: Programming The Voice Mail Ports

    Installing Port Cards Programming the Voice Mail Ports Required Programming for the Voice Mail Ports Prog ram ming the Voice Mail Por ts After you install a Port Card, you must install the Voice Mail ports in system software. You must install the Voice Mail ports if this is a new installation or if you are just adding a Port Card.
  • Page 15 From the Port Options Menu, setup each option for the newly installed port. For additional information, refer to the NVM-2000 System Guide (P/N 17500INS05 or higher). For each of the following options, pressing F5 (Previous) or F6 (Next) will enable you to scroll Note: through the list of newly installed ports and enter the appropriate information for each port.
  • Page 16 Installing Port Cards Programming the Voice Mail Ports Required Programming for the Voice Mail Ports (cont’d) 15. For Self Test: If you wish to perform a Self Test on the port, press Y, and press Enter. If not, entry should be N (default), and press Enter. Note: After you perform a Self Test on a port, it is recommended that you disable the Self Test option.
  • Page 17 NEC America, Inc., Corporate Networks Group 4 Forest Parkway, Shelton, CT 06484 Tel: 800-365-1928 Fax: 203-926-5458 cng.nec.com Other Important Telephone Numbers Sales: ........203-926-5450 Customer Service: .
  • Page 18 NEC America, Inc., Corporate Networks Group 4 Forest Parkway, Shelton, CT 06484 TEL: 203-926-5400 FAX: 203-929-0535 July 2002 17501AINS01 cng.nec.com Printed in U.S.A.

Table of Contents