Safety Standards Compliance; Emc, Emi, And Esd Compliance; Equipment Safety Standard Compliance; Figure 1 Pse Certification - Nokia 7368 ISAM CPE A-240Z-A Product Manual

7368 ISAM CPE A-240Z-A Product Guide
Figure 1 PSE certification
This is a Class B product based on the standard of the Voluntary Control Council for Interference
from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in
a domestic environment, it may cause radio interference. Install and use the equipment according
to the instruction manual.
Warning

2.2 Safety standards compliance

This section describes the CPE compliance with the European safety standards.
2.2.1

EMC, EMI, and ESD compliance

The CPE equipment complies with the following EMC, EMI, and ESD requirements:
•
EN 300-386 V1.5.1: Electromagnetic Compatibility and Radio Spectrum Matters
(ERM): Telecommunications Network Equipment; Electromagnetic Compatibility
(EMC) requirements; Electrostatic Discharge (ESD) requirements
•
EN 55022 (2006): Class B, Information Technology Equipment, Radio
Disturbance Characteristics, limits and methods of measurement
•
EN 55024 (2010): Information Technology Equipment, Immunity Characteristics,
limits and methods of measurement
•
European Council Directive 2004/108/EC
•
EN 300-386 V1.4.1: 2008
•
EN 55022:2006 Class B (CPEs)
2.2.2

Equipment safety standard compliance

The CPE equipment complies with the requirements of EN 60950-1, Safety of
Information Technology Equipment for use in a restricted location (per R-269).
Issue: 01
All manuals and user guides at all-guides.com
3FE-46615-AAAA-TCZZA
ETSI CPE safety guidelines
19841
19