5 Wiring Connection Diagram ---------------------------------- 9 6 Schematic Diagram ---------------------------------------------10 7 Exploded View and Replacement Parts List -----------11 7.1. Exploded View For ER-GB80 ------------------------- 11 7.2. Replacement Parts List For ER-GB80 --------------12 7.3. Exploded View For ER-GB70 -------------------------13 7.4. Replacement Parts List For ER-GB70 --------------14 7.5.
2. Loosen two screws and remove the blade holder. 8. Insert a slotted screwdriver to take out the clip on both side. 3. Press the trimmer driving bar outward. (ER-GB80 and ER-GB70 only) 4. Loosen a screw on bottom and slide down the bottom...
Page 5
13. Slide up the trimmer and set the highest position. assembly. Unhook the rear side of trimmer to separate from the housing. (ER-GB80 and ER-GB70 only) 10. Pull the chassis and module assembly upward. NOTE: Make sure to attach the O-ring.
ER-GB80/ER-GB70/ER-GB60 4.2. Assembly Instructions 1. Rechargeable battery 3. Driving head Insert the rechargeable battery into the battery holder. Insert a motor tip pin into the hole of driving head and fit NOTE: the projections of housing into the holes of driving head.
Page 7
ER-GB80/ER-GB70/ER-GB60 5. Driving block 7. Housing O-ring Set the motor, module and battery assembly to the hous- Apply the grease (FLOIL G714S) on the housing O ring. ing A. Align the projection of the housing O-ring and the groove Place the motor holder first and then inset the battery ter- of housing.
Page 8
ER-GB80/ER-GB70/ER-GB60 11. Housing clip 14. Side panel and Front panel Set the both side of housing clips firmly. Attach both side of side panels by inserting the hooks into the slit of housing. Insert the projections of housing and press the hook on body.
ER-GB80/ER-GB70/ER-GB60 7.2. Replacement Parts List For ER-GB80 Safety Ref. Part No. Part Name & Description Quan- Remarks tity WERGB80K7458 COMB ATTACHMENT WERGB80K7468 COMB ATTACHMENT WERGB80K7478 COMB ATTACHMENT WER9602Y BLADE BLOCK WER504L0167 SPRING FOR CUTTER (2PCS/PK) WERGB80K1588 BLADE HOLDER WES7025L9707 SCREW...
ER-GB80/ER-GB70/ER-GB60 7.4. Replacement Parts List For ER-GB70 Safety Ref. Part No. Part Name & Description Quan- Remarks tity WERGB80K7458 COMB ATTACHMENT WERGB80K7468 COMB ATTACHMENT WER9602Y BLADE BLOCK WER504L0167 SPRING FOR CUTTER (2PCS/PK) WERGB80K1588 BLADE HOLDER WES7025L9707 SCREW WER223L0207 RETAINING PLATE...
ER-GB80/ER-GB70/ER-GB60 7.6. Replacement Parts List For ER-GB60 Safety Ref. Part No. Part Name & Description Quan- Remarks tity WERGB80K7458 COMB ATTACHMENT WERGB80K7468 COMB ATTACHMENT WER9602Y BLADE BLOCK WER504L0167 SPRING FOR CUTTER (2PCS/PK) WERGB80K1588 BLADE HOLDER WES7025L9707 SCREW WER223L0207 RETAINING PLATE...