LG Styler S3 F Series Owner's Manual page 37

LG SmartThinQ Application
Features
• For appliances with the or
Smart Diagnosis™
This function provides useful information for diagnosing
and solving issues with the appliance based on the pattern
of use.
Energy Monitoring
The washer energy usage is affected by the cycles and op-
tions so you may see some changes in energy usage from
one cycle to another.
Push Alerts
When the cycle is complete or the appliance has problems,
you have the option of receiving push notifications on a
smart phone.
Settings
Set the product nickname and delete product.
NOTE
• If you change your wireless router, Internet service pro-
vider, or password, delete the registered appliance from
the LG SmartThinQ application and register it again.
• This information is current at the time of publica-
tion. The application is subject to change for product
improvement purposes without notice to users.
MFL66101258_EN.indd 37
Remote Start
Use a smart phone to control the appliance remotely or
check to see how much time is left in the cycle.
or logo
Using Remote Start
1
Press the Power button.
2
Press and hold Remote Start button for 3 seconds to
enable the Remote Start function.
3
Start a cycle from the LG SmartThinQ application on
your smart phone.
NOTE
• Once the Remote Start mode is enabled, you can start
a cycle from the LG SmartThinQ smartphone applica-
tion. If the cycle is not started, the machine will wait to
start the cycle until it is turned off remotely from the
application or the Remote Start mode is disabled.
Disabling Remote Start
When the Remote Start is activated, press and hold the
Remote Start button for 3 seconds.
Downloaded
Download new and specialized cycles that are not included
in the standard cycles on the appliance.
Appliances that have been successfully registered can
download a variety of specialty cycles specific to the
appliance.
Only one cycle can be stored on the appliance at a time.
Once cycle download is completed in the appliance, the
appliance keeps the downloaded cycle until a new cycle is
downloaded.
SMART FUNCTIONS 37
2019. 2. 11. 오전 10:55