Commissioning; Operation; Maintenance And Repair; Cleaning And Care - Bosch Rexroth 4THE5 Series Instruction Manual

8 Commissioning

During all work for commissioning the joystick, observe the general
safety instructions and intended use detailed in chapter 2 "Safety instructions"
from page 7 on.
▶ When commissioning the joystick, the machine may pose unforeseen dangers.
Before commissioning the system, you must therefore ensure that the vehicle
and the hydraulic system are in a safe condition.
▶ Commission the machine and check the correct functioning of the joystick
(e.g. direction of movement and correct messages or output levels).

9 Operation

This product is a component which requires no settings or changes during
operation. For this reason, this chapter of the manual does not contain any
information on adjustment options. Use the product only within the performance
range specified in the technical data.

10 Maintenance and repair

10�1 Cleaning and care
Damage to bellows, connectors and electronics/electrics due to mechanical
effects!
The water jet of a high-pressure cleaner may damage the bellows, connectors and
electronics/electrics of the joystick!
▶ Do not point the high-pressure cleaner directly towards the joystick.
For cleaning and care of the joystick, observe the following:
▶ Check whether all the seals and fittings on the plug-in connections are securely
seated to ensure that no moisture can penetrate into the joystick and the
installation space during cleaning.
▶ Use only water and, if necessary, a mild cleaning agent to clean the joystick.
Never use solvents or aggressive cleaning agents.
Commissioning | 4THE5
NOTICE
RE 29696-01-B/2021-06-15, Bosch Rexroth AG
19/24