Bosch Rexroth AGEV1-48404-AA/HM/L01H01-XC Operating Instructions Manual page 14

14/40 Safety instructions
Bosch Rexroth AG, Manifold block type AGEV1-48404-AA/HM/L01H01-XC, RE 62272-B/03.19
Leaking hydraulic fluid!
Hydraulic fluid may leak during mounting and demounting of hydraulic components.
Consequently, persons may slip or fall.
▶ Only remove protective caps from hydraulic blocks directly prior to their
installation.
▶ After mounting, provide the hydraulic fluid-carrying bores with suitable plug
elements.
▶ Immediately remove spilled hydraulic fluid and dispose of it properly.
Harmful hydraulic fluid!
Health hazard caused by contact with hydraulic oil (e.g. eye injury, skin damage,
intoxication upon inhalation and swallowing).
▶ Inspect hydraulic components and lines regularly for wear and damage.
▶ When carrying out work that involves contact with hydraulic oil, wear protective
gloves, safety glasses and suitable working clothes.
▶ If nevertheless hydraulic fluid comes into contact with the eyes or penetrates
the skin, consult a doctor immediately.
▶ When handling hydraulic fluids, strictly observe the safety notes of the hydraulic
fluid manufacturer.
Hot surfaces!
Manifold blocks may reach high temperatures during operation. This may lead to
burns in case of skin contact.
▶ Avoid contact with the manifold block during operation.
▶ Let manifold blocks cool down before touching them or wear protective gloves.
▶ If necessary, attach protective covers.
Contaminated hydraulic fluid!
Contamination in the hydraulic fluid may cause functional failures e.g. jamming or
clogging of nozzles or components on the manifold block. In the worst case, this
may result in unexpected system movements and thus constitute a risk of injury.
▶ Ensure adequate hydraulic fluid cleanliness according to the cleanliness classes
of the manifold block over the entire operating range.
▶ Flush the hydraulic system, if required.
CAUTION