Sony DSLR-A200 Instruction Manual (DSLR-A200) Instruction Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Digital Camera
  5. DSLR-A200 (DSLR-A200)
  6. Instruction manual

Sony DSLR-A200 Instruction Manual (DSLR-A200) Instruction Manual

Digital single lens reflex camera
Hide thumbs Also See for DSLR-A200 Instruction Manual (DSLR-A200):
Table of Contents

Advertisement

Quick Links

See also: Service Manual
Additional information on this product and
answers to frequently asked questions can be
found at our Customer Support Website.
Printed on 70% or more recycled paper using
VOC (Volatile Organic Compound)-free
vegetable oil based ink.
Printed in Japan
Digital Single Lens Reflex Camera
Instruction Manual
DSLR-A200
© 2008 Sony Corporation
3-277-950-11 (1)
Preparing the camera
Before your operation
Shooting images
Using the shooting
function
Using the viewing
function
Changing your setup
Viewing images on a
computer
Printing images

Advertisement

Table of Contents
loading

Related Manuals for Sony DSLR-A200 Instruction Manual (DSLR-A200)

Summary of Contents for Sony DSLR-A200 Instruction Manual (DSLR-A200)

  • Page 1 Printed on 70% or more recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Printed in Japan Digital Single Lens Reflex Camera Instruction Manual DSLR-A200 © 2008 Sony Corporation 3-277-950-11 (1) Preparing the camera Before your operation Shooting images Using the shooting function...
  • Page 2 The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DSLR-A200 Serial No. __________________________ WARNING...

  • Page 3: Important Safeguards

    IMPORTANT SAFEGUARDS For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance, or the one described in the operating instructions and adhere to them.
  • Page 4 – Never place the set in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided. – Do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight. Lightning For added protection for this set during a lightning storm, or when it is left...

  • Page 5: Read This First

    This Class B digital apparatus complies with Canadian ICES-003. For Customers in the U.S.A. If you have any questions about this product, you may call: Sony Customer Information Services Center 1-800-222-SONY (7669) The number below is for the FCC related matters only.

  • Page 6: For Customers In Europe

    Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the...
  • Page 7 Sony service station. Notice for the customers in the countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.

  • Page 8: Notes On Using Your Camera

    Notes on using your camera No compensation for contents of the recording The contents of the recording cannot be compensated for if recording or playback is not possible due to a malfunction of your camera or a memory card, etc. Back up recommendation To avoid the potential risk of data loss, always copy (back up) data to other...

  • Page 9: Table Of Contents

    Table of Contents IMPORTANT SAFEGUARDS ... 3 Read this first ... 5 Notes on using your camera ... 8 Preparing the Checking the accessories supplied ... 13 camera Preparing the battery pack ... 14 Attaching a lens ... 19 Inserting a memory card ... 21 Preparing the camera ...
  • Page 10 Shooting an image the way you want it (Exposure mode) Using the Selecting the focus method ... 67 shooting function Using the flash ... 72 Adjusting the brightness of the image (Exposure, Flash Setting ISO ... 82 ... 56 Shooting with program auto ... 57 Shooting by controlling the blur of the background (Aperture priority) ...
  • Page 11 Adjusting the color tones (White balance) ... 83 Image processing ... 87 Using the viewing Playing back images ... 93 function Checking the information of recorded images ... 98 Protecting images (Protect) ... 101 Deleting images (Delete) ... 102 Viewing images on a TV screen ... 104 Changing your Setting image size and image quality ...
  • Page 12 Others Specifications ... 139 Troubleshooting ... 143 Warning messages ... 152 Precautions ... 154 Index ... 156...

  • Page 13: Preparing The Camera

    Preparing the camera Checking the accessories supplied The number in parentheses indicates the number of pieces. • BC-VM10 Battery charger (1)/ Power cord (mains lead) (1) • Rechargeable battery pack NP- FM500H (1) • USB cable (1) • Video cable (1) •...

  • Page 14: Preparing The Battery Pack

    Preparing the battery pack When using the camera for the first time, be sure to charge the NP- FM500H “InfoLITHIUM” battery pack (supplied). Charging the battery pack The “InfoLITHIUM” battery pack can be charged even when it has not been fully depleted. It can also be used when it has not been fully charged.
  • Page 15 • We recommend charging the battery pack in an ambient temperature of between 10 to 30°C (50 to 86°F). You may not be able to efficiently charge the battery pack outside of this temperature range. Notes • Connect the battery charger to an easily accessible wall outlet (wall socket) close by. •...

  • Page 16: Inserting The Charged Battery Pack

    Inserting the charged battery pack While sliding the battery cover open lever, open the battery cover. Firmly insert the battery pack all the way while pressing the lock lever with the tip of the battery. Close the battery cover. To remove the battery pack Turn off the camera and slide the lock lever in the direction of the arrow.
  • Page 17 To remove the battery cover The battery cover can be removed to attach a vertical grip (not supplied). To remove the cover, push the lever in the direction of the arrow and slide it out. To attach the cover, put the knob in the hole, pull down the lever, and slide it in.
  • Page 18 Effective use of the battery pack • Battery performance decreases in low temperature surroundings. So, the time that the battery pack can be used is shorter in cold places. We recommend the following to ensure longer battery pack use: put the battery pack in a pocket close to your body to warm it up, and insert it in your camera immediately before you start shooting.

  • Page 19: Attaching A Lens

    Attaching a lens Remove the body cap from the camera and the rear cap from the lens. Mount the lens by aligning the orange index marks on the lens and camera. Turn the lens clockwise until it clicks into the locked position. Notes •...
  • Page 20 To remove the lens Press the lens release button all the way in and turn the lens counterclockwise until it stops. • When changing the lens, quickly change the lens away from dusty locations so as to keep dust from getting inside the camera.

  • Page 21: Inserting A Memory Card

    Inserting a memory card You can use a CompactFlash card (CF card), Microdrive, or “Memory Stick Duo” as a memory card. Open the memory card cover. Insert a memory card (not supplied) from the terminal side (the terminal side has a number of small holes) with its label side facing toward the LCD monitor.

  • Page 22: Notes On Using Memory Cards

    To remove the memory card Check that the access lamp is not lit, then open the memory card cover, push down the memory card eject lever. After the card is ejected a little, pull out the memory card. Notes on using memory cards •...
  • Page 23 • The Microdrive is a compact hard disk drive. Since the Microdrive is a rotating disk, the Microdrive is not strong enough to resist vibration and shock compared to a memory card. Be sure not to transmit vibration or shock to the Microdrive during playback or shooting.
  • Page 24 • Do not use or store the “Memory Stick Duo” under the following conditions: – High temperature locations such as the hot interior of a car parked in direct sunlight. – Locations exposed to direct sunlight. – Humid locations or locations with corrosive substances present.

  • Page 25: Preparing The Camera

    Preparing the camera Setting up the date When you turn the camera on for the first time, the date/time setup screen appears. Set the POWER switch to ON to turn the camera on. • To turn the camera off, set it to OFF. Verify that [OK] is selected on the LCD monitor, then press the center of the controller.
  • Page 26 Repeat step 3 to set other items, then press the center of the controller. • When changing the sequence of [YYYY/MM/DD], first select [YYYY/ MM/DD] with b/B, then change it with v/V. Verify that [OK] is selected, then press the center of the controller.

  • Page 27: Using The Accessories Supplied

    Using the accessories supplied This section describes how to use the shoulder strap and the eyepiece cover. The other accessories are described in the following pages. • Rechargeable battery pack (page 14) • Battery charger, Power cord (mains lead) (page 14) •...
  • Page 28 Carefully slide the eyecup off by pushing on each side of the eyecup. Slide the eyepiece cover over the viewfinder. Note • The eyepiece sensors located below the viewfinder may be activated depending on the situation, and the focus may be adjusted or the LCD monitor may continue to flash.

  • Page 29: Checking The Number Of Recordable Images

    Checking the number of recordable images Once you insert a memory card into the camera and set the POWER switch to ON, the number of images that can be recorded (should you continue to shoot using the current settings) is displayed on the LCD monitor.
  • Page 30 The number of images that can be recorded using a battery pack The approximate number of images that can be recorded is 750 when you use the camera with the battery pack (supplied) at full capacity. Note that the actual numbers may be less than those indicated depending on the conditions of use.

  • Page 31: Cleaning

    Cleaning Cleaning the LCD monitor Wipe the screen surface with an LCD cleaning kit (not supplied) to remove fingerprints, dust, etc. Cleaning the lens • When cleaning the lens surface, remove dust using a blower brush. In case of dust that sticks to the surface, wipe it off with a soft cloth or tissue paper slightly moistened with lens cleaning solution.

  • Page 32: Cleaning The Image Sensor

    Cleaning the image sensor If dust or debris enters the camera and lands on the image sensor (the part that acts as the film), it may appear on the photo image, depending on the shooting environment. If there is dust on the image sensor, use a commercially available blower brush and clean the image sensor following the steps below.
  • Page 33 Detach the lens (page 20). Use the blower brush to clean the image sensor surface and the surrounding area. • Do not touch the image sensor with the tip of the brush. Complete the cleaning quickly. • Hold the camera’s face downward to prevent the dust from resettling in the camera.

  • Page 34: Before Your Operation

    Identifying parts and screen indicators See the pages in parentheses for details of operation. Front side Shutter button (48) Control dial (58, 112) Self-timer lamp (90) Lens contacts* Mirror* Lens mount Built-in flash* (72) Mode dial (48) (Flash pop-up) button (72) Lens release button (20) Focus mode switch (67, 71) * Do not directly touch these parts.

  • Page 35: Rear Side

    Rear side Accessory shoe (40) Viewfinder (26) Eyepiece sensors (69) POWER switch (25) MENU button (41) DISP (Display) button/LCD brightness button (39, 93) (Delete) button (102) (Playback) button (93) LCD monitor (37, 39) Diopter-adjustment dial (26) For shooting: (Exposure) button (78) For viewing: (Zoom out) button (94)/...

  • Page 36: Sides/Bottom

    Sides/Bottom VIDEO OUT/USB terminal (104, 120) Memory card cover Memory card insertion slot (21) Memory card eject lever (22) Hooks for shoulder strap (27) REMOTE terminal • When connecting the RM- S1AM/RM-L1AM Remote Commander (not supplied) to the camera, insert the plug of the Remote Commander in the REMOTE terminal, aligning the guide of the plug on the...

  • Page 37: Lcd Monitor (Recording Information Display)

    LCD monitor (Recording information display) • The illustration above is for the detailed display. The enlarged display is displayed as the default setting. Display Indication P A S M Mode dial (48) 1/125 Shutter speed (61) F5.6 Aperture (59) +2.0 Exposure (63) AE lock (76) Display...
  • Page 38 Display Indication Battery remaining (17) Image quality (106) Image size (106) Remaining number of recordable images (29)
  • Page 39 Switching the recording information display Press the DISP button to switch between the enlarged display and the detailed display. When you rotate the camera to a vertical position, the display automatically rotates to adjust to the camera position. DISP button Detailed display Enlarged display No display...

  • Page 40: Viewfinder

    Viewfinder Display Indication AF area (70) Spot AF area (70) Spot metering area (80) Shooting area for aspect ratio 16:9 (106) Display Indication Flash compensation (79) Flash charging (74) Wireless flash (74) High-speed sync* Manual focus (71) Focus Shutter speed (61) Aperture (59) EV scale (63, 91) AE lock (76)

  • Page 41: Selecting A Function/Setting

    Selecting a function/setting You can select a function for shooting or playback from the menu list. To display the menu list, press the Fn (Function) button, (Drive) button, or MENU button. Example: When the Fn button is pressed. From the menu list, use the controller to move the cursor to the setting of your choice and execute the selection.
  • Page 42 Following the operation guide, select [White balance] with v/V/ b/B on the controller, then press the center z to execute. Following the operation guide, select and execute the desired function. For example, to change [5500K] (the current setting), select [5500K] with v/ V, adjust the value of [ColorTemperature] with b/B, then press the center z to execute.

  • Page 43: The Functions Selected By The Fn (Function) Button

    The functions selected by the Fn (Function) button Flash mode (page 74) Autofocus mode (page 69) White balance (page 83) Metering mode (page 80) AF area (page 70) D-RangeOptimizer (page 87) The functions selected by the Single-shot adv. (page 89) Continuous adv.
  • Page 44 Playback menu Delete (102) Format (109) Protect (101) DPOF setup (133) • Date imprint (134) • Index print (134) Setup menu LCD brightness (114) Info.disp.time (114) Power save (113) Video output (105) Language (113) Date/Time setup (113) Cleaning mode (32) Reset default (117) PlaybackDisplay (93) Slide show (97)

  • Page 45: Shooting Images

    Shooting images Shooting an image without camera shake “Camera shake” refers to an unwanted movement of the camera that occurs after the shutter button has been pressed, resulting in a blurred image. To reduce camera shake, follow the instructions below. Correct posture Stabilize your upper body and take a position that keeps the camera from...

  • Page 46: Using The Super Steadyshot Function

    Camera shake warning indicator Due to potential camera shake, the (Camera shake warning) indicator flashes in the viewfinder. In this case, use the Super SteadyShot function, a tripod, or the flash. Note • The (Camera shake warning) indicator is displayed only in the modes that the shutter speed is automatically set.

  • Page 47: Using A Tripod

    Note • The Super SteadyShot function may not work optimally when the power has just been turned on, when the subject has just entered the area, or when the shutter button has been pressed all the way down without stopping halfway. Wait for the (Super SteadyShot scale) indicator scale to go down, and then press the shutter button down slowly.

  • Page 48: Shooting With The Automatic Setting

    Shooting with the automatic setting The “AUTO” mode allows you to easily shoot any subject under any conditions. Select when shooting in a location where the use of a flash is restricted. Set the mode dial to (Flash Off). Hold the camera and look into the viewfinder.
  • Page 49 Press the shutter button halfway down to focus. When the focus is confirmed, the focus indicator z or (Focus indicator) lights up (page 68). Press the shutter button fully down to shoot. • When the switch is set to ON, wait until the scale of the SteadyShot scale) indicator becomes low, then start shooting.

  • Page 50: Shooting With A Suitable Setting For The Subject (Scene Selection)

    Shooting with a suitable setting for the subject (Scene Selection) Selecting an appropriate mode for the subject or the shooting conditions allows you to shoot the image with a more suitable setting for the subject than in “AUTO” mode. Taking portrait photos This mode is suitable to Blur away backgrounds and sharpen the subject.

  • Page 51: Taking Landscape Photos

    Taking landscape photos This mode is suitable to Shoot the entire range of scenery in sharp focus with vivid colors. Set the mode dial to Shooting technique • To accentuate the openness of the scenery, set the lens to wide angle. (Landscape).

  • Page 52: Taking Small-Subject Photos

    Taking small-subject photos This mode is suitable to Shoot close subjects such as flowers, insects, dishes, or small goods. You can achieve clear and sharp focus. Set the mode dial to Shooting techniques • Get close to the subject and shoot at the minimum distance of the lens. •...

  • Page 53: Taking Moving-Subject Photos

    Taking moving-subject photos This mode is suitable to Shoot moving subjects outdoors or in bright places. Set the mode dial to Shooting techniques • The camera shoots images continuously while the shutter button is pressed. • Press and hold the shutter button halfway down until the right moment. •...

  • Page 54: Taking Sunset Photos

    Taking sunset photos This mode is suitable to Shoot the red of the sunset beautifully. Set the mode dial to Shooting techniques • Used to shoot an image accentuating the red color compared with other modes. This is also suitable for shooting the beautiful red of the sunrise. •...

  • Page 55: Taking Night View Photos

    Taking night view photos This mode is suitable to Shoot portraits in night scenes. Shoot night scenes at a distance without losing the dark atmosphere of the surroundings. Set the mode dial to Set [Flash mode] to (Flash Off) when you shoot a night view without persons (page 74).

  • Page 56: Shooting An Image The Way You Want It (Exposure Mode)

    Shooting an image the way you want it (Exposure mode) With a single lens reflex camera, you can adjust the shutter speed (how long the shutter is open) and aperture (the range that is in focus: depth of field) to enjoy a variety of photographic expressions. For example, you can use a fast shutter speed to shoot the ephemeral shape of a wave, or you can accentuate a flower by opening the aperture to put everything in front of and beyond the flower out of focus.

  • Page 57: Shooting With Program Auto

    Shooting with program auto This mode is suitable to Use the automatic exposure, while keeping the custom settings for ISO sensitivity, Creative Style, D-Range optimizer, etc. Keep the exposure compensation measured by the camera, but change the combination of shutter speed and aperture depending on the subject (Program shift).
  • Page 58 To use Program shift Press the shutter button halfway down to adjust the focus. The correct exposure (shutter speed and aperture value) determined by the camera is indicated. Rotate the control dial to select your desired combination while the focus is achieved. The recording mode indicator is switched to “P ”...

  • Page 59: Shooting By Controlling The Blur Of The Background (Aperture Priority)

    Shooting by controlling the blur of the background (Aperture priority) This mode is suitable to Put the subject in sharp focus and blur everything in front of and beyond the subject. Opening the aperture narrows the range that is in focus.
  • Page 60 Select the aperture value (F- number) with the control dial. • Smaller F-number: The foreground and background of the subject are blurred. Larger F-number: The subject and its foreground and background are also focused on. • You cannot check the blurring of an image in the viewfinder.

  • Page 61: Shooting A Moving Subject With Various Expressions (Shutter Speed Priority)

    Shooting a moving subject with various expressions (Shutter speed priority) This mode is suitable to Shoot a moving subject at a moment in time. Use a faster shutter speed to crisply shoot an instant of the movement. Trace the movement to express the dynamism and flow.

  • Page 62: Control Dial

    Select the shutter speed with the control dial. Adjust the focus and shoot the subject. The aperture is automatically adjusted to obtain correct exposure. • When the camera judges that the proper exposure is not obtained with the selected shutter speed, the aperture value flashes.

  • Page 63: Shooting With The Exposure Adjusted Manually (Manual Exposure)

    Shooting with the exposure adjusted manually (Manual exposure) This mode is suitable to Shoot with the desired exposure setting by adjusting both the shutter speed and aperture. Use an exposure meter. Set the mode dial to M. Rotate the control dial to adjust the shutter speed, and while pressing the button, rotate the...
  • Page 64 Shoot the image after the exposure is set. • Check the exposure value on the EV scale. Toward +: Images become brighter. Toward –: Images become darker. The b B arrow appears if the set exposure is beyond the range of the EV scale.

  • Page 65: Shooting Trails With Long Exposure (Bulb)

    Shooting trails with long exposure (BULB) This mode is suitable to Shoot trails of light, such as fireworks. Shoot trails of stars. Set the mode dial to M. Rotate the control dial to the left until [BULB] is indicated. While pressing the rotate the control dial to adjust the aperture (F-number).
  • Page 66 Press the shutter button halfway down to adjust the focus. Attach the eyepiece cover (page 27). Press and hold the shutter button for the duration of the shooting. As long as the shutter button is pressed, the shutter remains open. Shooting techniques •...

  • Page 67: Using The Shooting Function

    Using the shooting function Selecting the focus method There are two methods for adjusting the focus: autofocus and manual focus. Using autofocus Set the focus mode switch to AF. Look into the viewfinder. The subject inside the focus area comes into focus automatically (Eye-Start AF).
  • Page 68 Focus indicator Focus indicator z lit z flashing Subjects that may require special focusing: Using the autofocus, it is hard to focus on the following subjects. In such cases, use the focus lock shooting feature (page 69) or manual focus (page 71).

  • Page 69: Shooting With Your Desired Composition (Focus-Lock)

    To deactivate the Eye-Start AF function MENU button t 1 t [Eye-Start AF] t [Off] • When attaching the FDA-M1AM Magnifier (not supplied) or the FDA- A1AM Angle Finder (not supplied) to the camera, setting [Eye-Start AF] to [Off] is recommended because the eyepiece sensors located below the viewfinder may be activated.

  • Page 70: Selecting The Focus Area (Af Area)

    (Automatic AF) When you press and hold the shutter button, if the subject is (Continuous Shooting techniques • Use (Single-shot AF) when the subject is motionless. • Use (Continuous AF) when the subject is in motion. Selecting the focus area (AF area) Select the desired AF are to suit the shooting conditions or your preference.

  • Page 71: Adjusting The Focus Manually (Manual Focus)

    Note • The AF area may not be illuminated during continuous shooting or when the shutter button is pressed all the way down without pause. Adjusting the focus manually (Manual focus) When it is difficult to get the proper focus in autofocus mode, you can adjust the focus manually.

  • Page 72: Using The Flash

    Using the flash In a dark location, using the flash allows you to shoot the subject brightly, and it also helps to prevent camera shake. When shooting into the sun, you can use the flash to shoot a bright image of the backlit subject. Press the button.
  • Page 73 The flash range The range within which the correct exposure is provided depends on the combination of the flash range and ISO sensitivity. Refer to the following table to determine the shooting distance. Aperture F2.8 AUTO 1.4 – 8.6 m (4.6 – 28 setting feet) 1 –...

  • Page 74: Selecting The Flash Mode

    Note • The red-eye reduction is available only when the built-in flash is used. Selecting the flash mode Fn button t [Flash mode] t Select the desired setting (Flash Off) (Autoflash) (Fill-flash) (Slow sync.) (Rear sync.) (Wireless) Shooting techniques • When shooting indoors or using nightscape, you can use slow sync to shoot a bright image of people and the background.
  • Page 75 Fn button t [Flash mode] t • To do a pre-flash test, pull up the flash and press the AEL button on the camera. Notes • Turn off the wireless flash mode after wireless flash shooting. If the built-in flash is used while the wireless flash mode is still active, inaccurate flash exposures will result.

  • Page 76: Adjusting The Brightness Of The Image (Exposure, Flash Compensation, Metering)

    Adjusting the brightness of the image (Exposure, Flash compensation, Metering) Shooting with fixed brightness (AE Lock) When shooting into the sun or by a window, the exposure may not be appropriate for the subject because of the big difference in lighting between the subject and the background.
  • Page 77 Press the AEL button to lock the exposure. (AE lock mark) appears in the viewfinder and on the LCD monitor. While pressing the AEL button, focus on the subject, and shoot the subject. • If you continue to shoot with the same exposure value, press and hold the AEL button after the shooting.

  • Page 78: Using Brightness Compensation For The Entire Image (Exposure Compensation)

    Using brightness compensation for the entire image (Exposure compensation) Except for recording mode M, the exposure is automatically acquired. (Automatic exposure) Based on the exposure acquired by the automatic exposure, you can perform exposure compensation by shifting the exposure to either the + side or the –...

  • Page 79: Adjusting The Amount Of Flash Light (Flash Compensation)

    Shooting techniques • Adjust the compensation level by checking the recorded image. • Using bracket shooting, you can shoot multiple images with the exposure shifted to the plus or minus sides (page 90). Adjusting the amount of flash light (Flash compensation) When shooting with the flash, you can adjust the amount of flash light alone, without changing the exposure compensation.

  • Page 80: Selecting The Method For Measuring The Brightness Of A Subject (Metering Mode)

    ADI flash Pre-flash TTL ADI: Advanced Distance Integration TTL: Through the lens • When [ADI flash] is selected, using a lens that is provided with a distance encoder feature can perform more accurate flash compensation by using more accurate distance information. Notes •...
  • Page 81 Shooting techniques • Use (Multi segment) metering for general shooting. • When shooting a subject with strong contrast in the focus area, measure the light of the subject you want to shoot with the proper exposure using Spot metering, then perform AE lock shooting (page 76).

  • Page 82: Setting Iso

    Setting ISO Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger the number, the higher the sensitivity. Press the ISO button to display the ISO screen. Select the desired value with v/V on the controller. •...

  • Page 83: Adjusting The Color Tones (White Balance)

    Adjusting the color tones (White balance) The color tone of the subject changes depending on the characteristics of the light source. The table below shows how the color tone changes based on various light sources, compared with a subject that appears white under the sunlight.

  • Page 84: Setting The Color Temperature And A Filter Effect (Color Temperature/Color Filter)

    AWB (Auto WB) (Daylight) (Shade) (Cloudy) (Tungsten) (Fluorescent) (Flash) Shooting techniques • Use the white balance bracket function if you cannot get the desired color in the selected option (page 92). • When you select [5500K] (ColorTemperature) or [00] (Color filter), you can adjust the value to the desired value (below).

  • Page 85: Registering The Color Tones (Custom White Balance)

    5500K* Sets the white balance by the color temperature. The higher (ColorTemperature) the number, the more reddish the image and the lower the number, the more bluish the image. (Color filter) Achieves the effect of CC (Color Compensation) filters for photography.
  • Page 86 Note • The message “Custom WB error” indicates that the value is beyond the expected range. (When the flash is used on a subject in close proximity or a subject with a bright color is in the frame.) If you register this value, the on the recording information display on the LCD monitor.

  • Page 87: Image Processing

    Image processing Correcting the brightness of the image (D-Range Optimizer) Fn button t [D-RangeOptimizer] t Select the desired setting (Off) No compensation. (Standard) When there is a sharp contrast of light and shadow between the subject and the background, which is common when shooting into the sun, the camera attenuates the contrast across the entire image to produce an image with proper brightness and contrast.
  • Page 88 Adobe RGB color space has a wide range of color reproduction, compared to sRGB that is the standard color space of the digital camera. If the main purpose is to print out the image, especially when a large part of the subject is vivid green or red, Adobe RGB is more effective than other sRGB color modes.

  • Page 89: Selecting The Drive Mode

    Selecting the drive mode This camera has five drive modes, such as single-shot advanced, continuous advanced. Use them for your purpose. Shooting single shot This mode is for normal shooting. button t Shooting continuously The camera records the images continuously at a maximum of 3 images per second*.

  • Page 90: Using The Self-Timer

    Using the self-timer The 10-second self-timer is convenient when the photographer appears in a photo and the 2-second self-timer is convenient to reduce the camera shake. button t • The number after Adjust the focus and shoot the subject. • When the self-timer is activated, audio signals and the self-timer lamp indicate the condition.
  • Page 91 button t Desired bracket t Desired bracket step Adjust the focus and shoot the subject. The base exposure is set at the first shot in the bracket. * (Bracket: Shoots three images with the exposure shifted by a selected Cont.) step.

  • Page 92: Shooting With White Balance Shifted (Wb Bracket)

    • When Single bracket is selected, if the shutter button is pressed halfway down and released, “br 1” appears for the ambient light bracket and “Fbr 1” appears for the flash bracket in the viewfinder. When bracket shooting starts, it indicates what number the next frame is, for instance, “br 2,” “br 3.”...

  • Page 93: Using The Viewing Function

    Using the viewing function Playing back images The last recorded image is displayed on the LCD monitor. Press the Select an image with b/B on the controller. To return to the shooting mode Press the button again. To switch the recording data display Press the DISP button.

  • Page 94: Rotating An Image

    Note • When you play back the image on a TV or a computer, the image will be displayed in the portrait position even if [Manual rotate] is selected. Rotating an image Display the image you want to rotate, then press the Press the center of the controller.
  • Page 95 Zoom the image in or out with the button. • You can select the portion you want to enlarge with v/V/b/B on the controller. • Rotating the control dial switches the image at the same display magnification. When you shoot multiple images with the same composition, you can compare their focus conditions.

  • Page 96: Switching To The Display Of The Image List

    Scale up or down the red frame to specify the portion you want to enlarge with the Press the center of the controller. The portion inside the red frame is enlarged. • Press the center of the controller to return to the previous screen. •...
  • Page 97 To select a folder Select the folder bar with b/B on the controller, then press the center. Select the desired folder with v/V, then press the center. Playing back images automatically (Slide show) MENU button t Plays back recorded images in order (Slide show). The slide show automatically stops after all the images have been played back.

  • Page 98: Checking The Information Of Recorded Images

    Checking the information of recorded images Each time you press the DISP button, the information display changes (page 93). Basic information display Display Indication 100-0003 Folder - file number (124) Protect (101) DPOF3 DPOF set (133) Image quality (106) Image size (106) Battery remaining warning (17) 1/125...

  • Page 99: Histogram Display

    Histogram display Display Indication 100-0003 Folder - file number (124) Protect (101) DPOF3 DPOF set (133) Image quality (106) Image size (106) Battery remaining warning (17) Display Indication Histogram (100) P A S M Mode dial (48) 1/125 Shutter speed (61) F3.5 Aperture (59) ISO100...
  • Page 100 How to check the histogram A histogram is the luminance distribution that shows how many pixels of a particular brightness exist in the picture. Dark Light When the image has a high-key or low- Flashing key portion, that portion is flashed on the R (Red) histogram display (Luminance limit Luminance...

  • Page 101: Protecting Images (Protect)

    Protecting images (Protect) You can protect images against accidental erasure. Protecting selected images/canceling the protection of the selected images MENU button t Select the image you want to protect with b/B on the controller, then press the center of the controller. mark appears on the selected image.

  • Page 102: Deleting Images (Delete)

    Deleting images (Delete) Once you have deleted an image, you cannot restore it. Check whether you delete the image or not beforehand. Note • Protected images cannot be deleted. Deleting the image that is currently displayed Display the image you want to delete and press the Select [Delete] with v, then press the center of the controller.
  • Page 103 Select [Delete] with v on the controller, then press the center of the controller. Deleting all the images in the folder Press the button. Select the folder bar with b on the controller. Press the center of the controller, then select the folder you want to delete with v/V.

  • Page 104: Viewing Images On A Tv Screen

    Viewing images on a TV screen Turn off both your camera and the TV, and connect the camera to the Turn on the TV and switch the input. • See also the operating instructions supplied with the TV. Turn on the camera, and press the button.
  • Page 105 To use your camera abroad It may be necessary to switch the video signal output to match that of your TV system. MENU button t 1 t [Video output] t Select the desired setting NTSC Sets the video output signal to NTSC mode (e.g., for the USA, Japan).

  • Page 106: Changing Your Setup

    Setting image size and image quality Image size MENU button t [Aspect ratio]: [3:2] L:10M M:5.6M S:2.5M [Aspect ratio]: [16:9] L:8.4M M:4.7M S:2.1M Note • When you select a RAW file with [Quality], the image size of the RAW file corresponds to L.
  • Page 107 (RAW & File format: RAW (raw data) + JPEG JPEG) A RAW image and a JPEG image are created at the same time. This is suitable when you need two image files, a JPEG for viewing, and a RAW for editing. The image quality is fixed to [Fine] and the image size is fixed to [L].

  • Page 108: Setting The Method For Recording On A Memory Card

    Setting the method for recording on a memory card Selecting the method for assigning file numbers to images MENU button t setting Series Reset Selecting the folder name format The recorded images are stored in the automatically-created folder in the DCIM folder on the memory card.

  • Page 109: Creating A New Folder

    Creating a new folder You can create a folder in a memory card for recording images. A new folder is created with a number incremented one higher than the largest number currently used, and the folder becomes the current recording folder.

  • Page 110: Changing The Noise Reduction Setting

    Changing the noise reduction setting Disabling the noise reduction at a long exposure shooting When you set the shutter speed to a second or longer (Long exposure shooting), the noise reduction is turned on for the same duration as the shutter was open.

  • Page 111: Changing The Conditions Under Which The Shutter Can Close

    Changing the conditions under which the shutter can close Prioritizing the shutter opportunity To prioritize the shutter opportunity, select [Release] so you can shoot without acquiring a sharp focus. To shoot with a sharp focus, select [AF]. MENU button t 2 t [Priority setup] t [Release]...

  • Page 112: Changing The Functions Of The Button And Dial

    Changing the functions of the button and dial Changing the function of the AEL button The function of the AEL button can be selected from the following two functions: – Holding the locked exposure value by pressing the AEL button while the button is held down ([AEL hold]).

  • Page 113: Changing Other Settings

    Changing other settings Setting the sound on/off Selects the sound produced when the shutter is locked, during self-timer countdown, etc. MENU button t 2 t [Audio signals] t Select the desired setting Setting the time to turn the camera to the power save mode You can set the time to turn the camera to the power saving mode (Power save).

  • Page 114: Setting The Lcd Monitor

    Setting the LCD monitor Setting the brightness of the LCD monitor MENU button t setting • On the recording information or playback screen, you can adjust the brightness by pressing the DISP button a little longer. Setting the displayed time of the image right after shooting (Auto review) You can check the recorded image on the LCD monitor right after the shooting.
  • Page 115 Keeping on the LCD monitor while looking into the viewfinder In the default setting, while looking into the viewfinder, the LCD monitor is turned off to prevent the battery pack wearing down. If you want to turn on the LCD monitor while looking into the viewfinder, select [Off].

  • Page 116: Resetting To The Default

    Resetting to the default Resetting the functions used for shooting to the default setting You can reset the main functions of the recording mode when the mode dial is set to P, A, S, or M. MENU button t The items to be reset are as follows. Items Exposure compensation (78) Metering mode (80)
  • Page 117 Resetting the main functions of the camera to the default setting You can reset the main functions of the camera. MENU button t 3 t [Reset default] t [OK] The items to be reset are as follows. Items Exposure compensation (78) Metering mode (80) Autofocus mode (69) Recording information display (37)
  • Page 118 Custom menu Items Eye-Start AF (69) AEL button (112) Ctrl dial setup (112) Red eye reduc. (73) Auto review (114) Auto off w/ VF (115) Playback menu Items Date imprint (134) PlaybackDisplay (93) Slide show (97) Setup menu Items LCD brightness (114) Info.disp.time (114) Power save (113) File number (108)

  • Page 119: Viewing Images On A Computer

    Viewing images on a computer Copying images to your computer This section describes how to copy images in a memory card to a computer connected using a USB cable. Recommended computer environment The following environment is recommended for a computer connected to the camera to import images.
  • Page 120 Stage 1: Connecting the camera and your computer Insert a memory card with recorded images into the camera. Insert the sufficiently charged battery pack in the camera, or connect the camera to a wall outlet (wall socket) with the AC Adaptor/charger (not supplied).
  • Page 121 Stage 2: Copying images to a computer For Windows This section describes an example of copying images to a “My Documents” (For Windows Vista: “Documents”) folder. Click [Copy pictures to a folder on my computer using Microsoft Scanner and Camera Wizard] t [OK] as the wizard screen appears automatically on the desktop.
  • Page 122 Double-click the [My Documents] (For Windows Vista: [Documents]) folder. Then, right- click on the “My Documents” window to display the menu and click [Paste]. The image files are copied to the “My Documents” (For Windows Vista: “Documents”) folder. • When an image with the same file name exists in the copy destination folder, the overwrite confirmation message appears.

  • Page 123: Viewing Images On Your Computer

    Viewing images on your computer For Windows This section describes the procedure for viewing copied images in the “My Documents” (For Windows Vista: “Documents”) folder. Click [Start] t [My Documents] (For Windows Vista: [Documents]). • If you are using Windows 2000, double-click [My Documents] on the desktop.

  • Page 124: Deleting The Usb Connection

    Deleting the USB connection Perform the procedures listed below beforehand when: • Disconnecting the USB cable. • Removing the memory card. • Turning off the camera. x For Windows Double-click on the tasktray, then click t [Stop]. Confirm the device on the confirmation window, then click [OK] t [OK] (unnecessary for Windows XP/Vista).
  • Page 125 Example: viewing folders on Windows XP AFolders containing image data recorded using this camera. (The first three digits show the folder number.) BYou can create a folder by date form (page 108). • You cannot record/play back any images in the “MISC”...
  • Page 126 Right-click the image file, then click [Copy]. Double-click [Removable Disk] or [Sony MemoryStick] in [My Computer]. Right-click the [sssMSDCF] folder in the [DCIM] folder, then click [Paste]. • sss stands for any number within the range from 100 to 999.

  • Page 127: Using The Software

    Using the software To utilize images recorded with the camera, the following software is provided: “Picture Motion Browser,” “Image Data Converter SR,” “Image Data Lightbox SR” etc. Note • “Picture Motion Browser” is not compatible with Macintosh computers. Recommended computer environment x Windows Recommended environment for using “Picture Motion Browser”...

  • Page 128: Installing The Software

    Display: 1024 × 768 dots or more, 32,000 colors or more Installing the software You can install the software (supplied) using the following procedure. x Windows • Log on as Administrator. Turn on your computer, and insert the CD-ROM (supplied) into the CD-ROM drive.
  • Page 129 The following software is installed and shortcut icons appear on the desktop. • Sony Picture Utility “Picture Motion Browser” • Sony Image Data Suite “Image Data Converter SR” “Image Data Lightbox SR” After you install the software, a shortcut icon for the customers registration website is created on the desktop.
  • Page 130 For details on “Picture Motion Browser,” refer to “Picture Motion Browser Guide.” To start “Picture Motion Browser Guide,” click [Start] t [All Programs] (in Windows 2000, [Programs]) t [Sony Picture Utility] t [Help] t [Picture Motion Browser Guide]. To start “Picture Motion Browser”...
  • Page 131 • For details on “Image Data Converter SR,” refer to the Guide. To start the Guide, click [Start] t [All Programs] (in Windows 2000, [Programs]) t [Sony Image Data Suite] t [Help] t [Image Data Converter SR Ver.2]. To start up “Image Data Converter SR Ver.2.0”...
  • Page 132 • For details on “Image Data Lightbox SR,” refer to the Guide. To start the Guide from the Start menu, click [Start] t [All Programs] (in Windows 2000, [Programs]) t [Sony Image Data Suite] t [Help] t [Image Data Lightbox SR].

  • Page 133: Printing Images

    Printing images Specifying DPOF Using the camera, you can specify the images and the number of images to print before you print images at a shop or with your printer. Follow the procedure below. DPOF specifications are left with images after printing. It is recommended that you unspecify them after printing.

  • Page 134: Creating An Index Print

    Dating images You can date images when printing them. The position of the date (inside or outside the image, character size, etc.) depends on your printer. MENU button t [On] Note • This function may not provided, depending on the printer. Creating an index print You can create an index print of all the images in the memory card.

  • Page 135: Printing Images By Connecting The Camera To A Pictbridge Compliant Printer

    Printing images by connecting the camera to a PictBridge compliant printer Even if you do not have a computer, you can print images shot using your camera by connecting the camera directly to a PictBridge compliant printer. “PictBridge” is based on the CIPA standard.
  • Page 136 Stage 2: Connecting the camera to the printer Connect the camera to the printer. Turn on your camera and the printer. The screen used for selecting images you want to print appears. Stage 3: Printing Select the image to print with b/B on the controller, then press the center of the controller.
  • Page 137 To cancel the print During printing, pressing the center of the controller cancels the print. Remove the USB cable or turn off the camera. When you want to print again, follow the procedure (Stages 1 to 3) above. PictBridge menu Page 1 Print Prints the selected images.
  • Page 138 Layout Auto 1-up/Borderless 1-up 2-up 3-up 4-up 8-up Index Date imprint Day and time Date Page 2 Unmark all After the message appears, select [OK], then press the center of the controller. The DPOF mark on each image is cleared. When you cancel your specification without printing images, select this item.

  • Page 139: Specifications

    Others Specifications Camera [System] Camera Type Digital Single Lens Reflex Camera with built-in flash and interchangeable lenses Lens All of [Image sensor] Total pixel number of camera Approx. 10 800 000 pixels Effective pixel number of camera Approx. 10 200 000 pixels Image format 23.6×15.8 mm (APS-C format) Interlace scan...
  • Page 140 [Shutter] Type Electronically-controlled, vertical-traverse, focal- plane type Speed range 1/4000 second to 30 seconds, bulb, (1/3 EV step) Flash sync speed 1/160 second [Built-In-Flash] Flash G.No. GN 12 (in meters at ISO 100) Recycling time Approx. 4 seconds Flash coverage Covering 18 mm lens (focal length that the lens indicates)
  • Page 141 Trademarks • is a trademark of Sony Corporation. • “Memory Stick,” , “Memory Stick PRO,” “Memory Stick Duo,” , “Memory Stick PRO Duo,”...
  • Page 142 • Microdrive is a registered trademark of Hitachi Global Storage Technologies in the United States and/or other countries. • Adobe is a registered trademark or a trademark of Adobe Systems Incorporated in the United States and/or other countries. • D-Range Optimizer Advanced uses technology provided by Limited.

  • Page 143: Troubleshooting

    Troubleshooting If you experience trouble with your camera, try the following solutions. Check the items on pages 143 to 151. Consult your Sony dealer or local authorized Sony service facility. Check the following items. Remove the battery pack, and insert the battery pack again after about one minute, and turn on the power.
  • Page 144 The power turns off suddenly. • If you do not operate the camera for given period of time, the camera turns to power saving mode and nearly shuts down. To cancel the power save, operate the camera, such as pressing the shutter button halfway down (page 48).
  • Page 145 • You are shooting in RAW mode (page 106). Since the RAW data file is large, the RAW mode shooting may take time. The image is out of focus. • The subject is too close. Check the minimum focal distance of the lens. •...
  • Page 146 The image is whitish (Flare). Blurring of light appears on the image (Ghosting). • The picture was taken under a strong light source, and excessive light has entered the lens. Attach a lens hood. The corners of the picture are too dark. •...

  • Page 147: Deleting/Editing Images

    The image does not appear on the TV screen. • Check [Video output] to see if the video output signal of your camera is set to the color system of your TV (page 105). • Check whether the connection is correct (page 104). Deleting/Editing images Your camera cannot delete an image.
  • Page 148 You cannot copy images. • Make the USB connection by properly connecting the camera with your computer (page 120). • Follow the designated copy procedure for your OS (page 121). • When you shoot images with a memory card formatted by a computer, you may not be able to copy the images to a computer.
  • Page 149 “Memory Stick PRO Duo” is not recognized by a computer with a “Memory Stick” slot. • If “Memory Stick PRO Duo” is not supported on your computer’s “Memory Stick” slot, connect the camera to the computer (page 120). The computer recognizes the “Memory Stick PRO Duo.” Printing Also see “PictBridge compliant printer”...
  • Page 150 PictBridge compliant printer For details, refer to the operating instructions supplied with the printer or consult with the manufacturer of the printer. A connection cannot be established. • The camera cannot be connected directly to a printer that is not compliant with the PictBridge standard.
  • Page 151 • The camera has been left unused for sometime with a low battery or no battery pack. Charge the battery pack and set the date again (page 25). If the date setting is lost every time the battery pack is charged, consult your Sony dealer or local authorized Sony service facility.

  • Page 152: Warning Messages

    Warning messages If the following messages appear, follow the instructions. For “InfoLITHIUM” battery only • An incompatible battery pack is being used. Set date and time? • Set the date and time. If the message appears frequently, the internal backup battery is used up.
  • Page 153 System error • Turn the power off, remove the battery pack, then re-insert it. If the message appears frequently, consult your Sony dealer or local authorized Sony service facility. Unable to magnify. Unable to rotate image. • Images recorded with other cameras may not be enlarged or rotated.

  • Page 154: Precautions

    Precautions Do not use/store the camera in the following places • In an extremely hot, dry or humid place In places such as in a car parked in the sun, the camera body may become deformed and this may cause a malfunction. •...
  • Page 155 discharged. In this case, be sure to charge this rechargeable battery before using the camera. However, even if this rechargeable battery is not charged, you can still use the camera as long as you do not record the date and time. Charging method of the internal rechargeable battery Insert a charged battery pack in the...

  • Page 156: Index

    Index Numerics 40-segment honeycomb pattern metering...80 Adobe RGB ...87 AE lock ...76 AEL button ...112 AF area ...70 AF illuminator ...73 Ambient bracket ...91 Amount of exposure ...56 Anti-dust function...32 Aperture ...56, 59 Aperture priority ...59 Aspect ratio...106 Audio signals ...113 Auto off w/ VF ...115 Auto review ...114 Autoflash ...72, 74...
  • Page 157 Exposure compensation ... 78 Exposure lock ... 76 Exposure mode ... 56 Eyecup ... 27 Eyepiece cover ... 27 Eyepiece sensors ... 28 Eye-Start AF ... 69 File number ... 108 Flash compensation... 79 Flash control ... 79 Flash mode ... 72, 74 Flash Off ...
  • Page 158 Noise reduction...110 Number of images ...29, 30 PictBridge ...135 Picture Motion Browser ...130 PlaybackDisplay ...93 Portrait ...50 Power save...113 Preset white balance ...83 Pressing halfway down...49, 67 Print ...133, 135 Priority setup ...111 Program auto ...57 Program Shift...58 Protect...101 RAW...106, 131 Rear sync.

This manual is also suitable for:

A200 - alpha 10.2mp digital slr cameraDslr a200k - a digital camera slrDslr-a200w - a digital camera slrAlpha 200

Table of Contents