LG niagara4 MultiSITE Edge 10 User Manual page 39

If you did not change its IP address, after several minutes you should be able to double-click the platform instance again to
reconnect.
Note:
Going forward, you must access the MS-E10 device by its new (assigned) IP address. Note that your Workbench keeps a history
of TCP/IP changes made.
Reopening a platform connection using the new (changed) IP address
Figure 26: Reopening a platform connection
Also, you must use the credentials for the new platform user you created (to replace the factory-default platform user), or if you
created additional platform users, credentials for one of them.
If you changed your PC's IP address in order to commission the MS-E10 device, you usually need to reconfigure your PC's
TCP/IP settings back to appropriate settings (now) to communicate with it. Otherwise, you will be unable to connect to it for other
commissioning.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
MS- E10 User Guide
39