Advertisement
Difficult to View the Screen in Bright
Surroundings
You can view the screen easily by attaching the shade supplied. The
shade is magnetic and can be attached and removed easily.
When Wearing over Glasses
You can wear the headset even if you wear glasses.
• Make sure that you do not scratch the headset or your glasses
when wearing them.
• The headset cannot be worn over glasses that are wider than
approximately 144 mm (5.7 inches).
• You may not be able to wear the headset over the glasses
depending on the shape of your glasses.
The nose pad for glasses is worn on the nose from over the glasses.
Replacing Nose Pad
When replacing the nose pad, be sure to purchase the option for
the BT-40.
Pull the nose pad straight towards you to remove and replace them.
Cleaning the Headset
• If you can see dirt on the screen or if it is foggy, check the lens for
dirt such as dust or fingerprints.
If there is any dust or dirt attached to the lens, wipe it off with a
soft cloth.
When wiping the lens, do not use liquids such as lens cleaning
solutions or organic solvents.
• If anything except for the lens is dirty, wipe off the dirt with a wet
tissue. Do not use a tissue moistened with alcohol-based cleaning
liquid.
When the Accuracy of the Headset's
Sensor is Low
If the accuracy of the sensor is low in apps that use the headset's
geomagnetic sensor, wave the headset in a figure 8 shape while a smart
device or Intelligent Controller is connected to calibrate the sensor.
Support Information
The following Website provides information on app development
and firmware updates for this product.
https://tech.moverio.epson.com/en/
Advertisement
