Advertisement
Installing the Fuse-Block
Bracket
1. Loosen the 2 nuts and bolts securing the right side of
the ROPS to the frame of the machine
1. Bracket
2. Fuse block
2. Align the slots in the fuse-block bracket with the bolts
as shown in
Figure
3. Torque the ROPS fasteners to 136 to 149 N-m (100
to 110 ft-lb).
4. Use the 2 screws to secure the fuse block to the bracket
(Figure
11).
(Figure
Figure 11
3. Screws
4. ROPS bolts
11.
Installing the Side Consoles
1. Align the bolt holes in the new right console with the
bolt holes on the machine
11).
1. Flange-head bolts
2. Align the bolt holes in the existing left console with the
bolt holes on the machine.
3. Secure the side consoles with the existing flange-head
bolts.
5
(Figure
12).
Figure 12
Right console shown
2. Right console
Advertisement
