Parts identification
A
B
C
D
A
Main body
1 Trimming height
indicator
2 Dial (Height
adjustment control)
3 Power switch [ / ]
: OFF
: ON
4 Appliance socket
B
Blade block
5 Cleaning lever
6 Moving blade
7 Stationary blade
8 Mounting hook
10
E
F
@
C
Comb attachment
(1 mm to 10 mm)
D
AC adaptor (RE9-69)
9 Charging plug
Charge indicator
lamp
Cord
Power plug
Accessories
E
Oil
F
Cleaning brush
Charging
• Perform the following steps to charge the trimmer if it
seems to lose the speed.
• Wipe off any water droplets or dirt on the appliance
socket.
• Make sure that the main body is turned off.
Place the main body on the
1
1
AC adaptor.
• Insert it in the AC adaptor
tightly without any gaps.
Not doing so will not charge
the trimmer.
• If you charge the appliance
with power switch turned on,
it will start working when you
remove from the AC adaptor.
Insert the power plug into a household outlet.
2
2
• Check that the charge indicator lamp glows red.
• The charging time differs depending on the rated
voltage. (See page 18.)
Disconnect the power plug after charging is
3
3
completed.
(for safety and to reduce energy usage)
• The charge indicator lamp continues to glow after
charging is complete.
There is no indication to show that "charging is
complete".
2
1