Bosch CL300 Manual page 49

Flexible Automation
3.3 Operating Modes
3.3.1 RUN
The CL300 can operate in the RUN and STOP modes, which can be set on the
ZE300/301 central processing unit.
The start−up performance of the CL300 after power−on or from the stop state can
be determined in the OM7 or OM8 Organizational Modules provided for that pur
pose.
In RUN mode the following sequence is performed:
The user program is executed in cyclic, interrupt− or time−controlled man
D
ner.
The timers started in the program time out.
D
The inputs/outputs are enabled.
D
Operation
3−5