Download Print this page

General Safety Instructions - Bosch T10126 Original Instructions Manual

Transport lug

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
en-us | 43 | T10126

2 General Safety Instructions

WARNING
Read and follow all safety notes and instructions!
Failure to follow the safety instructions may result in
serious injuries and material damages.
Observe and follow the safety notes below.
The load holding device has been specifically
constructed for its intended use. The safety of the
load holding device can no longer be ensured if it is
misused or modified in ways not expressly approved
by the manufacturer. Serious injuries or damage to
property can occur.
Ensure each person using the load holding device is
familiar with these instructions and can access them
at all times.
Ensure all users are also familiar with the operating
manuals of all tools and workshop equipment, which
are necessary for the work.
Carefully read and adhere to the instructions in the
technical safety information of the Volkswagen
Group brands.
Wear safety shoes (according to ISO 20345, S2).
Wear protective gloves in order to avoid cuts.
Position hands and feet carefully to avoid potential
crushing hazards.
Use the load holding device only for work approved
by the Volkswagen Group.
Use the load holding device only with the
accessories approved by the Volkswagen Group.
Do not exceed the maximum load capacity of 466 kg/
set.
Use the transport lugs only for the 10 cylinder TDI
engine in accordance with the workshop manuals of
the Volkswagen Group brands.
Tighten the screw connections with the prescribed
torque.
Use screws of the prescribed quality and dimension.
2018-07-10
Use only with a workshop crane (e. g. VAS 6100)
approved by Volkswagen and an approved
suspension device.
Ensure the track is clear and easily visible.
Move the load slowly and carefully.
Observe the transport lug as well as the load during
all movements.
The positioning of persons under the load and in the
dangerous area is prohibited during the movement
process.
Do not work on suspended loads.
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany

Advertisement

loading