10
If a different length cable is required, you can build your own cable, but only straight connector kits
are currently available. See "Building Custom Length Cables" below.
Specifications
Cable Length
Connector
Connector Depth for Cables IC693CBL327/328
The following figure shows that these cables extend 2" out from the face of the modules they are
connected to. The depth of the cabinet that the PLC is mounted in should allow for the 2" depth
added by this connector.
Figure 10-38. Dimension for Depth of Connector for IC693CBL327/328
10-58
Series 90-30 PLC Installation and Hardware Manual – August 2002
for a drawing of these modules. See GFK-0898, the Series 90-30 PLC I/O Module
Specifications Manual, for details about these modules.
16-point modules that are equipped with the TBQC I/O faceplate adapter. See Appendix H
for information on the TBQC (Terminal Block Quick Connector). Use the IC693CBL328
right side cable for this application.
10 feet (3 meters)
Fujitsu FCN-365S024-AU
2.0"
Series 90-30
I/O Module
GFK-0356Q