Bosch Professional GWS 18V-10 PC Original Instructions Manual
Hide thumbs
Also See for Professional GWS 18V-10 PC:
- Original instructions manual (423 pages) ,
- Original instructions manual (133 pages)
Related Manuals for Bosch Professional GWS 18V-10 PC
Summary of Contents for Bosch Professional GWS 18V-10 PC
- Page 1 GWS Professional 18V-10 PC | 18V-10 PSC Robert Bosch Power Tools GmbH 70538 Stuttgart GERMANY www.bosch-pt.com 1 609 92A 5WM (2020.08) O / 424 1 609 92A 5WM Original instructions...
- Page 2 L-BOXX 136 1 600 A01 2G0 6 082 850 5UM 1 600 A00 R26 Bosch Power Tools 1 609 92A 5WM | (25.08.2020)
- Page 3 (2) (3) (4) (5) (10) (11) (12) (13) (18) (14) (14) (14) (19) (16) (15) (17) (17) (17) 1 609 92A 5WM | (25.08.2020) Bosch Power Tools...
- Page 4 (27) (28) (29) (11) (30) (31) (32) (20) (14) (33) (21) (17) (34) (38) (35) (37) (22) (36) (23) (25) (26) (24) GWS 18V-10 ... Bosch Power Tools 1 609 92A 5WM | (25.08.2020)
-
Page 5: Safety Instructions
Use of an RCD reduces the risk of electric condition that may affect the power tool’s operation. shock. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Bosch Power Tools 1 609 92A 5WM | (25.08.2020) - Page 6 Do not operate the power tool near flammable materi- can break and fly apart. als. Sparks could ignite these materials. The outside diameter and the thickness of your ac- cessory must be within the capacity rating of your 1 609 92A 5WM | (25.08.2020) Bosch Power Tools...
- Page 7 The guard helps to protect operator from broken wheel Be aware that wire bristles are thrown by the brush fragments, accidental contact with wheel and sparks that even during ordinary operation. Do not overstress the could ignite clothing. Bosch Power Tools 1 609 92A 5WM | (25.08.2020)
-
Page 8: Product Description And Specifications
Bluetooth SIG, Inc. and any use of such marks by Robert Bosch Power Tools GmbH is under li- If the use of a guard is recommended for wire brush- cense. -
Page 9: Technical Data
E) The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be signi- ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.). Bosch Power Tools 1 609 92A 5WM | (25.08.2020) -
Page 10: Noise/Vibration Information
Bluetooth® Low Energy Module GCY 30-4. 18V...) (see figure A) The three green LEDs of the battery charge indicator (29) in- dicate the state of charge of the battery (8). For safety reas- 1 609 92A 5WM | (25.08.2020) Bosch Power Tools... -
Page 11: Battery Charge Indicator
(16). The extraction guard (12) is not suitable for working metals. Fitting Protective Equipment A suitable Bosch vacuum cleaner can be connected to the Remove the battery from the power tool before carry- extraction guard (12). - Page 12 Flap disc Only use quick-clamping nuts (17) that are in good Always fit the hand guard (21) when working with the working order and not damaged. flap disc. 1 609 92A 5WM | (25.08.2020) Bosch Power Tools...
-
Page 13: Dust/Chip Extraction
Carry out a test run for at least one minute with no load. Do not use abrasive tools that are Bosch Power Tools 1 609 92A 5WM | (25.08.2020) - Page 14 Illuminated red Power tool is overheated or battery is empty Allow the power tool to cool down, or replace or charge the battery 1 609 92A 5WM | (25.08.2020) Bosch Power Tools...
-
Page 15: Practical Advice
Flap discs have a considerably longer service life, lower disc to cool down by running the power tool for a short time noise levels and lower sanding temperatures than conven- at maximum speed with no load. tional grinding discs. Bosch Power Tools 1 609 92A 5WM | (25.08.2020) -
Page 16: Maintenance And Service
You can find explosion drawings and information on spare parts at: www.bosch-pt.com The Bosch product use advice team will be happy to help you with any questions about our products and their accessor- ies.