Epson LightScene EV-110 User Manual page 135

4. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release
the Menu button.
The lights flash as settings transfer to the SD card. When the lights stop flashing, the On/Standby
light turns blue and the projector enters standby mode.
Caution: Do not unplug the power cord or remove the SD card while the lights are flashing. This
could damage the projector.
5. Once the projector enters standby mode, remove the SD card.
Parent topic: Copying Menu Settings Between Projectors
135