Tire Pressure; Transport, Storage, And Ruin; Transport; Storage - Bosch TCE 260 Operation Manual

5. Frequently stop inflation and check the pressure in-
side the tire, not exceeding 3.5bar, un-til the pressu-
re inside the tire meet the requirement and avoid the
tire pressure not ex-ceeding the max pressure.
6. Attach the core to the nozzle.
7. Connect the inflation gun and then press the deflate
button to remove the residual air.
8. Mount the nozzle.
7.4

Tire pressure

1. Securing the correct tire pressure is very important
to the safety of the wheel.
2. The low tire pressure will cause the tire to be too
heat and with serious wear. And the life of the tire
will be shortening. The inside of tire will be damaged
and the oil consumption will be larger.
3. The high tire pressure will cause easy damage when
clamping and the tire wall will be seriously worn.
4. You must check you tire pressure one a week. You
should prepare a spare tire before you start a long
distance journey.
5. Check the tire pressure under the normal tire tem-
perature, not check when the tire temperature is too
high or too low.
6. Normal tire temperature means the vehicle has not
run for more than one hour or the run for not more
than 2-3km in low speed.
7. The tire pressure under normal tire temperature
should meet the requirement of the car and the tire
producer.
8. When the can is under heavy load, if the tire pressu-
re are not special specified, normally speaking, the
tire pressure will increase by 0.3bar.
8. Transport, Storage, and
Ruin
8.1

Transport

1. Switch off the air supply switch and power supply
switch.
2. Transport the machine as per the method in chapter
"Unpacking".
When you hoist the machine, you should not
damage the nozzle and air hose on the machine. Pay
mote attention to the process of hoisting machine.
Robert Bosch GmbH
Transport, Storage, and Ruin | TCE 260 | 19
8.2

Storage

If you want to store the machine for a long
time, you must secure:
1. Switch off the air supply and power supply and lubri-
cate the movable parts to prevent rusting.
2. The storage temperature is -25℃-55℃
3. The machine should be kept away from the inflam-
mable and explosive materials. It should also be kept
from sun and glare. The place to store the machine
should be good ventilation.
8.3 Ruin
If you want to ruin the machine, you must
secure:
1. Switch off the air supply and power supply.
2. Remove all the non-metal substances and treat them
as per the local law and regulation.
3. Collect the oil and treat them at the pointed place as
per the local law and regulation.
4. Ruin the other metal substances.
Environment:
The machine contains some substances which will
pollute the environment and cause the damage to the
human body if they are not treated properly.
9.

Maintenance

9.1

Warning

Non-professional personnel should not under-
take maintenance.
R
As per the description in the manual, undertake the
maintenance periodically. This is very necessary to
prolong the life of the machine and guarantee the
normal work condition of the machine.
Do not undertake the periodical maintenance,
the reliability and operation of the machine will not get
guarantee and may cause danger to the machine, opera-
tor and the people nearby.
Before undertake any maintenance, you should
switch off the air supply and power supply. By repea-
ting stepping down the pedal, you can deflate the
residual air in the machine completely.
en
|
1 987 AT7 374 2015-09-02