Humidifier & Dehumidifier Operating Mode; Temperature, Alerts, And Auto-On; Run Time - Bosch BCC100 Installation Manual And User's Manual

Thermostat Overview
Humidifier & Dehumidifier Operating Mode
You can enable automatic humidity control if the correct
humidifier or dehumidifier accessory was correctly wired and
configured during the thermostat's initial setup. Based on the
setup, the thermostat turns on the humidifier during heating
operation and the dehumidifier will be turned on during cooling
operation. You can also configure the thermostat to operate
similar to a humidistat, which runs the humidifier or
dehumidifier, regardless of an active heating/cooling call.
Note:
You may only operate in either humidifier OR dehumidifier
mode and may not operate in both modes at the same time.
36

Temperature, Alerts, and Auto-On

Alert:
Send an alert message or turn on the system
automatically when the room temperature is out of the range
between set-points.
Note: Alerts are an additional source of protection for your
heating/cooling appliance.

Run Time

The thermostat keeps track of your run time for the Heating,
Cooling, Air Filter and Water Pad. You can also set a reminder
for Air Filter and Water Pad according to the number of
calendar days. When it reaches its predefined run time, the
thermostat displays a notification and sends a message to the
registered smart device(s).