22 – English
Installing the UMTS module
To install the UMTS module, proceed as follows:
►
Insert the UMTS module, contacts first, into the bay. Take care not to trap the antenna cables.
►
Carefully push the UMTS module downwards.
►
Pull the protective tubes carefully away from the antenna contacts.
►
Secure the UMTS module with the enclosed screws.
Before connecting the antenna cables, you must first remove the protective tubes from the
!
cables.
To prevent damage to the antenna contacts, connect the antenna cables carefully to the
!
corresponding ports.
Ensure correct connection of the antenna cables:
●
Connect the orange antenna (1) to the AUX port
●
Connect the black or yellow antenna (2) to the MAIN port
►
Fasten the two antenna cables.
►
To fit the cover again, stow the cables carefully in the recess of the UMTS module bay, as
shown.
►
Re-insert the cover and tighten the screws.
►
Re-insert the ventilation slot cover. Ensure that it engages.
46
Installing the UMTS module in LIFEBOOK T731
1
2
1
1
Fujitsu Technology Solutions