Sharp SD-SG11 Operation Manual page 44

SD-SG11
Timer and Sleep Operation (continued)

Sleep operation
The radio, CD, and MiniDisc can all be turned off automatically.
1
Play back the desired sound source.
2
Press the TIMER/DELETE button.
3
Within 10 seconds, press the REC LEVEL/CURSOR
to select "SLEEP".
4
Within 10 seconds, press the ENTER button.
5
Press the REC LEVEL/CURSOR
time.
(Maximum: 2 hours - Minimum: 1 minute)
6
Press the ENTER button.
7
Your system will enter the power stand-by mode automatically af-
ter the preset time has elapsed.


The volume will be turned down 1 minute before the sleep operation finishes.
E-41
To confirm the remaining sleep time:
1
2
or button






To cancel the sleep operation:
or button to specify the sleep
The sleep timer is canceled when the unit enters the stand-by mode.
To cancel only the sleep timer without setting the unit to the stand-by mode, proceed
as follows.
1
2
3
Press the TIMER/DELETE button while the sleep timer is set.
Within 10 seconds, press the REC LEVEL/CURSOR
"SLEEP".
Remaining sleep time
The display will return to normal after approximately 10 seconds.
You can change the sleep time.
Press the ENTER button while the sleep remaining time is displayed (see steps 5
- 6 on the left).
Press the TIMER/DELETE button while the sleep timer is set.
Within 10 seconds, press the REC LEVEL/CURSOR
"SLEEP OFF".
Within 10 seconds, press the ENTER button.
01/7/12 38-48.fm
or button to select
or button to select