Interfaces At The Y-Repeater; View On The Connector Panels; Description Of The Interface; Connection Of The Y-Repeater (Block Diagram) - Bosch Rexroth IndraControl VDP 16.1 Series Project Planning Manual

VDP 16.1, VDP 40.1 and VDP 60.1
7.2

Interfaces at the Y-Repeater

View on the Connector Panels

Description of the Interface

Des. on the Type of connection
housing
X21 Digital 24 V input
(input bit to select the active VDP)
X33 GIGASTAR interface (connection to IPC)
X31 GIGASTAR interface (connection to VDP1)
X32 GIGASTAR interface (connection to VDP2)

Connection of the Y-Repeater (Block Diagram)

DOK-SUPPL*-VDP16/40/60-PR02-EN-P
The connections are located at the two shorter sides of the Y-Repeater:
Fig. 7-11: Interface to the IPC
Fig. 7-12: Interface to the VDP displays
Overview
Type of connector
(integrated)
Weidmüller male connector
terminal, MSTB 1.5, 3-pin
D-Sub male connector, 25-pin
D-Sub female connector, 25-pin
D-Sub female connector, 25-pin
Fig. 7-13: Connection at the Y-Repeater
IPC 40.2
Fig. 7-14: Connection of the Y-Repeater
Mating connector or cable
(from outside)
Weidmüller female connector
terminal, MSTB 1.5, 3-pin
D-Sub female connector, 25-pin
D-Sub male connector, 25-pin
D-Sub male connector, 25-pin
Changeover input
X21
X31
X33
Y-Repeater
X32
7-7
Interfaces
Y-Anschluss1.FH9
Y-Anschluss2.FH9
VDP
XIPC
XIPC
VDP
Y_repeater.FH9