Makita BV4500-118 Instruction Manual page 4

3. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another.
4. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
liquid contacts eyes, additionally seek medical
help.
irritation or burns.
5. Do not use a battery pack or tool that is dam-
6.
excessive temperature.
7. Follow all charging instructions and do not
charge the battery pack or tool outside the
tions.
Service
1.
repair person using only identical replacement
parts.
tool is maintained.
2. Never service damaged battery packs. Service
3. Follow instruction for lubricating and chang-
ing accessories.
4. Do not modify or attempt to repair the appli-
ance or the battery pack except as indicated in
the instructions for use and care.
Lockbolt/blind rivet installation tool
safety warnings
1.
2. Keep hands away from moving parts.
3. Always secure workpieces in a vise or similar
hold-down device.
4.
sure no one is below when using the tool in
high locations.
5. Never place the tool on unstable surface. When
6. When operating the tool, do not block or seal
the ventilation windows of the tool.
Symbols
volts
direct current
Important safety instructions for
battery cartridge
1. Before using battery cartridge, read all instruc-
-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using
battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5. Do not short the battery cartridge:
-
(1) Do not touch the terminals with any con-
ductive material.
(2) Avoid storing battery cartridge in a con-
-
tainer with other metal objects such as
nails, coins, etc.
(3) Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
breakdown.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50 °C (122 °F).
7. Do not incinerate the battery cartridge even if
it is severely damaged or is completely worn
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
10. The contained lithium-ion batteries are subject
to the Dangerous Goods Legislation require-
ments.
aging and labeling must be observed.
national regulations.
11. Follow your local regulations relating to dis-
posal of battery.
12. Use the batteries only with the products
SAVE THESE INSTRUCTIONS.
CAUTION:
charger.
4 ENGLISH
Only use genuine Makita batteries.
-
-
-