Cpwd Change Password; Clip Calling Line Identification Presentation - Nokia 30 GSM Connectivity Terminal At Command Manual

7.4 +CPWD CHANGE PASSWORD

Command
Execute +CPWD=<fac>,<oldpwd>,<newpwd>
Test +CPWD=?
The +CPWD command sets a new password for the lock function facility defined by the
Facility Lock +CLCK command. Note that the target lock has to be in <mode>=1.
The test command returns a list of pairs that present the available facilities and the maximum
length of their passwords.
Defined values
<fac>:
"PS"
"SC"
"AB"
"P2"
<oldpwd>, <newpwd>
specified for the facility from the ME user interface or for using the Change
Password +CPWD command. <newpwd> is the new password

7.5 +CLIP CALLING LINE IDENTIFICATION PRESENTATION

Command
Set +CLIP=<n>
Read +CLIP?
Test +CLIP=?
The +CLIP command refers to the GSM supplementary service CLIP (Calling Line
Identification Presentation) that enables a called subscriber to get the calling line identity
(CLI) of the calling party when receiving a mobile terminated call. The +CLIP command
enables or disables the presentation of the CLI. It has no effect on the execution of the CLIP
supplementary service in the network.
When the presentation of the CLI is enabled (and the calling subscriber allows it), the +CLIP:
number>,
<type> response is returned after every RING (or +CRING: <type>; refer to "Cellular result
codes +CRC") result code.
Response
+CPWD:
("PS",10),("SC",8),("AB",4),("P2",8)
PH-SIM lock phone to SIM card
SIM lock SIM card
All barring services
SIM PIN2
string type; <oldpwd> should be the same as the password
Response Default
0
+CLIP: <n>,<m>
+CLIP: (0,1)
+cme error
x
38/107