After Completing The Massage; Cleaning And Maintenance - Panasonic EP1082KL-COMBO Operating Instructions Manual

Household massage lounger
Hide thumbs Also See for EP1082KL-COMBO:
Table of Contents

Advertisement

AFTER COMPLETING THE MASSAGE
RETURN THE SEAT TO THE ORIGINAL POSITION
1
Check that there is nothing in the vicinity of
the backrest.
2
Press the OFF/ON button twice.
The backrest will automatically return to its original position.
3
Place the controller in its holder.
4
Return the pillow and the back cushion to
their original positions.
DISCONNECT THE POWER
See Warning No. 1 on page 1.
1
Slide the power switch to the "off" position.
2
Turn the lock switch key to the "lock" position.
3
Unplug the power cord.
4
The lock switch key must be stored out of the reach of children.
CLEANING AND MAINTENANCE
See Danger No.  on page 1.
LEATHER COVERING ON THE PILLOW, THE BACK CUSHION AND THE UNIT
Wipe these areas with a soft, dry cloth.
(Do NOT use cloths containing any kind of chemical, etc.)
If the leather is particularly dirty, dampen with liquid soap and brush the surface. Wipe with a cloth dampened with water. Allow
to dry naturally.
(Do NOT use a hair dryer to try to dry the surfaces more quickly.)
Wearing of denim, colored, patterned or other clothing with a tendency to fade should be avoided during use, as it could lead to
discoloration of the leather.
Please do NOT use thinners, benzine or alcohol.
PIPE AND PLASTIC AREAS
1 Wipe the unit with a cloth that has been soaked in a mild detergent and then thoroughly wring out.
 Next wipe the unit with a cloth that has been moistened with just water and thoroughly wring out.
*Make sure you thoroughly wring out the cloth first when cleaning the controller.
3 Allow the unit to dry naturally.
Please do NOT use thinners, benzine or alcohol.
COATED FABRIC
1 Wipe the seat fabric with a cloth that has been soaked in a mild detergent solution and then thoroughly wrIng out.
 Use a brush to apply a mild detergent to areas where the coated fabric has become particularly soiled. Be careful not to brush
the fabric too much as this may damage it.
3 Next wipe the fabric with a cloth that has been moistened with just water and then thoroughly wrIng out.
4 Allow the fabric to dry naturally.
Please do NOT use thinners, benzine or alcohol.
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ep1082tlEp1082

Table of Contents