Download Print this page

Cuisinart CTG-00-2TCO Installation Manual

Sliding under cabinet organizer

Download this manual

INSTALLATION INSTRUCTIONS

STEP 1 –

Place the support

brackets (#3) outside of bottom

wire basket (#1). Screw the

3/8" bolts (#4) from inside of

bottom wire basket (#1) toward

outside using screwdriver.

Installation Guide – Model CTG-00-2TCO

3. Support brackets (2)

REQUIRED TOOLS (not provided) – Drill, 1/8" Drill Bit, Screwdriver

CONTINUED ON REVERSE SIDE

SLIDING UNDER CABINET ORGANIZER

PARTS LIST

1. Bottom wire basket (1)

4. 3/8" bolts (8)

6. Gliders (1 left/1 right)

8. Bottom basket mat (1)

STEP 2 –

Place the upper basket

(#2) against the supporting

brackets (#3). Screw the 3/8"

bolts (#4) from inside of upper

wire basket (#2) toward outside

using screwdriver.

2. Upper wire basket (1)

5. Template (1)

7. 5/8" screws (8)

9. Upper basket mat (1)

Page 1 SLIDING UNDER CABINET ORGANIZER Installation Guide – Model CTG-00-2TCO PARTS LIST 1. Bottom wire basket (1) 2. Upper wire basket (1) 4. 3/8" bolts (8) 5. Template (1) 3. Support brackets (2) 7. 5/8" screws (8) 6. Gliders (1 left/1 right) 8.
Page 2 $4.00 for shipping and handling of the product. Be sure to include a return address, description of the product problem, phone number, and any other information pertinent to the product’s return. Please pay by check or money order made payable to Cuisinart. This warranty excludes damage caused by accident, misuse or abuse, including damage caused by overheating, and it does not apply to scratches, stains, discoloration or other damage to external or internal surfaces that does not impair the functional utility of the tool/gadget.