Intended Use - DeWalt D25981 Original Instructions Manual

Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Date Code Position (Fig. A)
The date code 19 , which also includes the year of manufacture,
is printed into the housing.
Example:
2017 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
On/off switch
1
Side handle(s)
2
Tool retainer
3
Tool holder
4
Handle screws
5
Air vents
6
Optional accessories (Fig. C)
Various types of 28 mm hex. chisels are available as an option.
Pointed chisel
7
Cold chisel
8
Scaling tool
9
Spade chisel
10
Asphalt cutter
11
Driver ground rod
12
Shank tamper
13
Plate tamper
14
Consult your dealer for further information on the
appropriate accessories.

Intended Use

Your breaker has been designed for professional heavy duty
demolition, chipping and chasing applications in concrete, brick,
stone and other masonry materials.
DO nOt use under wet conditions or in the presence of
flammable liquids or gases.
These breakers are professional power tools.
DO nOt let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Soft Start Feature
The soft start feature allows the impact rate to build up more
slowly, thus preventing the chisel or point from "bouncing"
around on the masonry when starting up.
Fully Vibration-dampened Handles (Fig. A)
The dampers in the handles
2
transmitted to the user. This improves user comfort during
the operation.
Active Vibration Control
The active vibration control neutralises rebound vibration from
the breaker mechanism. Lowering hand and arm vibration, it
allows more comfortable use for longer periods of time and
extends the life of the unit.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
Side Handle (Fig. A, H)

CAUTION: ALWAYS operate the tool with the side
handle properly assembled. Hold tool with both
hands to maximize control.
Attach left side handle 2 with four hex head
screws 5 (supplied). Tighten with hex wrench supplied.
nOtE: Side handle must be installed in the proper orientation
with the nub on the end of the grip facing down.
Inserting and Removing 28 mm Hex
Accessories (Fig. D–F)
This machine uses chisels with a 28 mm hex. shank. We
recommend to use professional accessories only.

WARNING: Since accessories other than those offered
by D WALT have not been tested with this product,
e
the use of such accessories may entail hazardous
situations. To reduce the risk of injury, use only accessories
recommended by D WALT.
e
Clean the chisel shank.

WARNING: Do not apply lubricant to the machine.
EngLIsh
absorb the vibrations
19