Page 1
1) If you have spoken with a GE call representative regarding this Software Update Module, and do not have a service call scheduled, please follow the installation instructions included in the kit to upgrade your refrigeration software.
Page 2
2) Remove the grommet from the input jack if present. Connect one end of the cable to the input jack on top of the GE Refrigerator (see picture). The input jack is above the left door, seven inches from the front of the door. You may need to move your refrigerator out slightly to...
Page 3
The lights will blink rapidly followed by a 5 second pause. Please count the number of times the lights blink between pauses and call se ice Please return the Software Update Module to GE in the pre-addressed, stamped envelope.