Table of Contents
Advertisement
Available languages
Available languages
12 | English
Operating instructions
Please read the operating instructions carefully before
you use the appliance!
Safety information
w
This appliance is intended for domestic use or for
household-based non-commercial applications. House-
hold-based applications include, e.g. usage in employ-
ees catering facilities for shops, offices, agricultural
and other commercial operations, as well as usage by
guests of guest houses, small hotels and similar resi-
dential establishments.
Risk of electric shock!
Switch off the mains voltage supply immediately
if a fault occurs.
w
We do not accept liability for damage resulting from
failure to heed these instructions.
w
The continuous-flow heater may only be connected
and put into operation by a qualified professional.
w
Repairs may only be undertaken by a suitably quali-
fied specialist to avoid potential sources of danger.
w
The continuous-flow heater may only be installed in a
frost-free room.
w
Persons (including children) with diminished bod-
ily, sensory or mental perception, or those who lack
knowledge or experience should not operate the
appliance, unless they are monitored or have received
instruction concerning use of the appliance by per-
sons responsible for their safety.
w
Keep children away from the appliance. Please moni-
tor children to ensure that they do not play with the
appliance.
w
The mixer and the warm water pipe may be hot.
w
Please switch off all fuses immediately if a malfunc-
tion occurs. Immediately shut off the cold water sup-
ply to the appliance should it leak. The malfunction
can only be repaired by a specialist or an authorised
service agent.
Your new appliance
The electronic continuous-flow heater
"ComfortElectronic " is intended exclusively for heating
water which flows through the appliance.
The continuous-flow heater switches on and heats the
water when the warm water tap is opened. It switches
off as soon as the tap is closed.
9 000 813 417 | (17.9.12)
Operating the continuous-flow
heater
Selecting shower temperature
You can select the desired temperature by turning the
continuously variable rotary knob, which can be adjust-
ed from 30 °C to 60 °C.
Conserving energy and water
Mixing in of cold water in the fitting requires unneces-
sary water and energy. You should therefore set the de-
sired temperature directly on the continuous-flow heater
and then open the water tap.
In "e" position the appliance is operated economically.
Using the appliance after switching off
the water supply
w
Switch off the appliance (unscrew the fuse in the
house electrical installation).
w
Open the warm water tap and keep it open until the
air has been completely forced out of the water pipe.
w
Switch the fuse back on again.
The appliance is now ready to operate.
Cleaning
w
Only wipe off the appliance using a moist cloth. Do
not use acidic or abrasive cleaning materials.
w
Do not use a steam cleaner.
Customer Service
We ask you to always provide the E-No. and the FD-No.
of your appliance when calling in a customer service
engineer.
You will find the numbers on the inner side of the fold
up operating panel on the continuous-flow heater.
ROBERT BOSCH HAUSGERÄTE GMBH
E-Nr.
FD
Robert Bosch Hausgeräte GmbH
Advertisement
Table of Contents
