Modes And Their Applications; Preparation - Panasonic EH‑XR10 Operating Instructions Manual

Modes and their applications

Select the mode appropriate to the desired application.
Mode RF/Ultrasonic
Area of
application
Face line, cheeks,
and mouth
• Do not use on the
forehead.
RF × Ultrasonic
Function
energy × Vibration
Usage
10 min.
time
EH-XR10_HK.indb 11

Preparation

Skin (Allergy) test procedure
Make sure to check compatibility of this appliance with
RF
your skin as this product is normally used together with
conductive gel. Skin care products you normally use can
also be used in place of the gel.
This check must be performed to ensure you experience
no skin issues as a result of use.
• Testing is required for each of your skin care products.
Forehead
1
1
Clean the test area (inner arm) with soap
RF
and water, and dry it with a towel.
2
2
Apply the conductive gel or skin care product.
2 min.
• Apply a light amount just enough to cover the head.
3
3
Turn on the power and make contact with your
skin.
1. Turn on the power and select the RF/Ultrasonic
mode. (See page 13.)
2. Once the appliance has completed the preheating
process, press the ultrasonic probe onto your skin
and slowly move the appliance in a circle for
approximately 10 seconds. (See page 14.)
• The head vibrates.
Skin
Gel
Conductive gel
11
2020/01/24 18:17:46