Advertisement
12
Installing the Weights
Rear Cutting Unit with Groomer
Only, and with Rear Grass Basket)
Parts needed for this procedure:
Carriage bolt (5/16 x 2-1/4 inches), Part No.
1
3230-7—sold separately
Carriage bolt (5/16 x 3-1/4 inches), Part No.
1
3230-13—sold separately
Carriage bolt (5/16 x 4-1/2 inches), Part No.
1
3230-30—sold separately
2
Spacer
1
Flange nut (5/16 inch)
Locknut (5/16 inch), Part No. 3296-47—sold
2
separately
2
Weight
6
Small weight (Part No. 132-0734-03—sold separately)
Procedure
For a rear cutting unit with the groomer kit and the
rear grass basket installed (no rear roller brush kit),
refer to
Figure
21.
Also install the weights on the front cutting units.
Note:
For front cutting units with the groomer kit and
the front grass baskets installed (no rear roller brush
kit), refer to
Figure
19.
Note:
The center cutting unit does not work with both
the rear roller brush kit and the rear grass basket kit.
Rear cutting unit with groomer and rear grass basket
1. Bolt (5/16 x 4-1/2 inches),
sold separately
2. Bolt (5/16 x 2-1/4 inches),
sold separately
3. Bolt (5/16 x 3-1/4 inches),
sold separately
4. Spacer (2), sold separately 8. Small weight (4), sold
12
Figure 21
installed
5. Weight (2), supplied with
the kit
6. Locknut (5/16 inch), sold
separately
7. Flange nut (5/16 inch),
sold separately
separately
g192301
Advertisement
