Miele EVS 7110 Operating And Installation Instructions page 9

Built-in vacuum sealing drawer
Table of Contents

Advertisement

During installation, maintenance and repair work, the drawer must
be disconnected from the mains electricity supply. It is only
completely isolated from the electricity supply when:
– the mains circuit breaker is switched off, or
– it is switched off at the wall socket and the plug is withdrawn from
the socket. Do not pull the mains connection cable but the mains
plug to disconnect your appliance from the mains electricity
supply.
If the drawer is installed behind a furniture panel (e.g. a door),
ensure that the door is never closed whilst the drawer is in use. Heat
and moisture can build up behind a closed furniture panel and cause
subsequent damage to the drawer, the housing unit and the floor. Do
not close the door until the sealing bar and the drawer have cooled
down completely.
Warning and Safety instructions
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Evs 7010

Table of Contents