KX-CLPF1
2.1.2.
Front Cover
Before performing the following steps, remove the left cover (see above section 2.1.1).
1. Remove the screw.
2. Release the hook (A).
3. Insert a flat-blade screw driver through the opening (B) as shown in the Figure-1.
4. Release the hook (C) from the opening (D) by moving the flat-blade screw driver in the arrow (E) direction and pushing down
the top end of hook (C) in the arrow (F) direction.
5. Remove the front cover while releasing the 4 hook (G) and hook (H) with care to prevent damage to the hooks.
6