Page 1
Random Orbit Sander 圓形砂紙磨光機 SV 13YA SV 13YB • Handling instructions 使用說明書 Read through carefully and understand these instructions before use. 使用前務請詳加閱讀...
English d) Remove any adjusting key or wrench before GENERAL SAFETY RULES turning the power tool on. A wrench or a key left attached to a rotating part of WARNING! the power tool may result in personal injury. Read all instructions e) Do not overreach.
○ Mounting the polyester buff Repair, modifi cation and inspection of Hitachi Power Since the attachment is a hook-and-loop type as with Tools must be carried out by an Hitachi Authorized the sanding paper, the polyester buff can be mounted Service Center.
Page 6
Accordingly, some parts (i.e. code numbers and/or design) may be changed without prior notice. NOTE Due to HITACHI’s continuing program of research and development, the specifi cations herein are subject to change without prior notice.