Bosch Solution 3000 Instructions page 3

Learning in wireless keyfob to the Solution 3000
Add or Delete RF Wireless Keyfob
Add the Keyfob
Notice! Set RF receiver as WE800EV2 or RADION receiver through the menu [3][5][1].
1
• Enter the Master Code,
followed by [1] and the
[#] key (for example,
[25801#]).
6
• Press menu [-]
to exit
Delete the Keyfob
1
• Enter the Master Code,
followed by [1] and
the [#] key
2
• Choose a user number
then press the [#] key
5
• Enter [#] key to
confirm the operation,
or press [*] to cancel
2
• Choose a user number
then press the [#] key
5
• Press menu [-] to exit.
3
• Choose keyfob then
press the [#] key.
4
• Keyfob RFID displays. The letter "M" appears in
the top right corner of the display indicating it is
in manual mode
- In manual mode, enter the 9-digit RADION
keyfob RFID, followed by the [#] key.
- Or press [*] key to switch into auto mode to
configure RADION or RE012EU keyfobs. The
letter 'A' should appear in the top right corner
of the display indicating it is in automatic mode.
Hold button 1 or 2 of the keyfob till codepad
displays RFID number. Press [#] key to confirm.
3
• Choose keyfob then
4
• Press the [*] key to blank the
RFID and then press the [#]
to accept
press the [#] key.