Bosch DIVAR IP all?in?one 5000 Series Installation Manual page 18

18 en | Installing a hard drive
2.
3.
4.
5.
2019.08 | V1 | DOC
Remove the dummy drive from the hard drive carrier and
place the hard drive carrier on a flat surface.
Slide a new hard drive into the hard drive carrier with the
printed circuit board side facing down.
Align the mounting holes in both, the hard drive carrier and
the hard drive.
Secure the hard drive to the hard drive carrier with the six
screws.
DIVAR IP all-in-one 5000
Bosch Security Systems B.V.