Table of Contents
Advertisement
How to Install
4
Use lint-free soft cloth for cleaning the water tank before filling the tank
with water.
Do not cleaning device of coarse material such as scrubbing brush or scrubbing towel.
Caution
5
After cleaning the water tank, fill the tank with tap water.
Caution
6
Mount the moisture disk after filling the water tank with water, and
assemble the product in the reverse sequences of disassembling.
Caution
18
Thoroughly clean the water tank to remove foreign substances from the
metal part of the tank, and exercise care for preventing scratch on the tank.
(Scratching or foreign substances may malfunction of the level sensor.)
• Tap water is more sanitary. Tap water is treated with chlorine for
suppressing propagation of bacteria; while water other than tap water
(e.g., well water, water from water purified, mineral water and potable
water) is vulnerable to propagation of mold or bacteria.
• Do not put hot water exceeding 40℃, aroma oil, chemicals, contaminants
or aromatics into the water tank.
• Fill the water tank up to the level (the water line) marked on the tank.
Be cautious; water may overflow when moving the product.
• Never forget to disconnect the power cable from the receptacle when filling the
water tank.
• Water may remain in the water tank even if the product indicates no water in the
tank. Never forget to drain remaining water when supplying new water.
• This product is an air washer (spontaneous evaporating humidifier) humidifying space,
and purifies indoor air and collects contaminants on the bottom of the water tank.
Clean the water tank with mild detergent solution when fill the tank with new water.
Air washer
Advertisement
Table of Contents
