Table of Contents
Advertisement
18
en | Introduction
–
Using RS-485 reader interfaces, up to eight peripheral devices
can be connected to each AMC2. The four reader interfaces are
divided into two buses. Interface 1 and 2 are on one bus, and
interfaces 3 and 4 are on the other bus. With this arrangement,
you can connect all readers to one interface.
The extension interface supports up to three additional I/O
boards (AMC2-8IOE, AMC2-16IE, or AMC2-16IOE). All extension
boards are controlled by the AMC2 and are freely combinable.
2013-08 | AMC2-4R4 |
The maximum configuration depends on the system
software.
Access Modular
Bosch Sicherheitssysteme GmbH
Controller
Advertisement
Table of Contents
