Status - Resource Monitor - CPU Usage ......43 Shared Folders - Management ........136 Status - Resource Monitor - Disk Usage ......44 Accounts Management - Shared Folders ....145 Status - Resource Monitor - Memory Usage .....45 D-Link ShareCenter Pro 1200-05 User Manual...
Page 3
Storing non-English Character Files ......260 System Management - Port Forwarding UPnP Router Detection ............. 191 Contacting Technical Support ........261 System Management - Port Forwarding Port Warranty .................262 Forwarding ................. 193 Network Services ..............198 Registration ..............267 D-Link ShareCenter Pro 1200-05 User Manual...
The ShareCenter Pro 1200 is a hybrid NAS/iSCSI storage enclosure that offers concurrent NAS/iSCSI functionality. The included CD contains D-Link’s Easy Search Utility. This utility allows you to locate the ShareCenter Pro on the network and map drives to your computer. Backup software is also included on the CD. This software allows you to back up your files from a computer to the ShareCenter Pro manually, by a schedule, or in real-time.
Note: The ShareCenter Pro 1200 should only be maintained by the authorized server manager or IT administrator. The ShareCenter Pro 1200 should be locked using the Front Panel Key. Only certified staff who have the Key are allowed to unlock it.
Section 1 - Product Overview Features The ShareCenter Pro 1200 unified network device is packed with a wide variety of features geared toward the small and medium business environment. Some of these features are listed below: Five 3.5-inches SATA Standard Drive with capacity CHAP ...
Page 7
Supports Windows Server 2008 Hyper-V Network access by service AFP support Syslog server Network UPS ISO mount WebDAV Amazon S3 IPv6 Connection Status Port Forwarding D-Link ShareCenter Pro 1200-05 User Manual...
Use the screws to fasten the SATA hard drives with the trays and insert to the ShareCenter Pro Use this button to switch the device on or off. Power Button To switch on the device press the button once. To switch off the device hold the button down for 5 seconds. D-Link ShareCenter Pro 1200-05 User Manual...
The cooling fan is used to cool the hard drives and feature speed control. When the unit is first powered on the fans rotate at a low speed and rotate at a high speed when the temperature rises above 36 °C. D-Link ShareCenter Pro 1200-05 User Manual...
Hard Drive Volume information- This screen shows the following information: The percentage of space used on the hard drives. Error Messages- This screen shows error messages when there is any system failure. button once to alternate between the different Status screens. Press the D-Link ShareCenter Pro 1200-05 User Manual...
Two holes are circled in red in the image, and the other two holes are on the other side of the drive tray. 2. Open the faceplate to access the drive bays. D-Link ShareCenter Pro 1200-05 User Manual...
Page 12
Section 2 - Installation 3. Insert the tray into a bay. 4. Depress the blue button to lock it into place. D-Link ShareCenter Pro 1200-05 User Manual...
Page 13
Section 2 - Installation 5. Connect an Ethernet cable to the available Ethernet port. This cable should connect the ShareCenter Pro to your local network via a router or switch, or directly to a computer for configuration. D-Link ShareCenter Pro 1200-05 User Manual...
Page 14
Section 2 - Installation 6. Connect the supplied power adapter to the power receptacle. D-Link ShareCenter Pro 1200-05 User Manual...
If it does not receive a DHCP assigned IP address, by default it will have a self-assigned IP address in the range of 169.254.0.0 to 169.254.255.255. It is recommended to use the included D-Link Easy Search Utility when accessing and configuring the ShareCenter Pro for the first time.
Section 3 - Configuration Getting Started To run the Easy Search Utility, insert the ShareCenter Pro CD into your CD-ROM drive: Click Easy Search Utility. D-Link ShareCenter Pro 1200-05 User Manual...
Page 17
ShareCenter Pro. If your network is using a DHCP server and the computer receives IP settings from DHCP server, the ShareCenter Pro will automatically be in the same subnet. D-Link ShareCenter Pro 1200-05 User Manual...
Page 18
ShareCenter Pro . If your network is using a DHCP server and the computer receives IP settings from DHCP, the ShareCenter Pro will automatically be in the same subnet. D-Link ShareCenter Pro 1200-05 User Manual...
These pages and their configuration options will be discussed in detail in the following pages of this manual. Note: After logging in to the ShareCenter Pro for the first time it is recommended to add a password to the admin account. D-Link ShareCenter Pro 1200-05 User Manual...
Page 20
Select the configuration type of the volume, Standard, JBOD, RAID 0, RAID1, RAID5 or RAID 6. Tick the corresponding check box to select the hard disk(s) in the array and spare. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 21
Confirm Password fields. Tick the Auto Unlock check box to automatically unlock the volume when the system starts. Tick the USB Key check box to save the password to a USB drive. Click Apply to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 22
Section 3 - Configuration A warning message appears before starting to create the volume. Click Yes to continue. The volume is being created. The status bar displays the percentage of completion in real time. D-Link ShareCenter Pro 1200-05 User Manual...
Page 23
Section 3 - Configuration Once the volume is created, the Volume page opens to show the information. D-Link ShareCenter Pro 1200-05 User Manual...
This window provides quick access to the Setup Wizard and the My Favorites section. Users can add the most frequently used functions to My Favorites and quickly access these functions by clicking the icon or selecting from the (My Favorites) drop-down list. D-Link ShareCenter Pro 1200-05 User Manual...
The ShareCenter Pro has a System Wizard that allows you to quickly configure some of the basic device settings. Click the System Wizard icon to start the Setup Wizard. When running the ShareCenter Pro System Wizard, the welcome screen details the five steps of the wizard. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 26
Section 3 - Configuration This window can configure the LAN 1 settings. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 27
Section 3 - Configuration This window can configure the LAN 2 settings. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 28
Section 3 - Configuration Enter the host name of the ShareCenter Pro. Enter the primary and secondary DNS server address in the fields. Use the drop-down menu to select the LAN interface. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 29
Section 3 - Configuration This window can enable or disable various the file sharing method. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 30
Select the configuration type of the volume, Standard, JBOD, RAID 0, RAID1, RAID5 or RAID 6. Tick the corresponding check box to select the hard disk(s) in the array and spare. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 31
Confirm Password fields. Tick the Auto Unlock check box to automatically unlock the volume when the system starts. Tick the USB Key check box to save the password to a USB drive. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 32
Section 3 - Configuration This window displays the information you configured in System Wizard. Click Apply to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 33
Section 3 - Configuration A warning message appears before starting to create the volume. The volume is being created. The status bar displays the percentage of completion in real time. D-Link ShareCenter Pro 1200-05 User Manual...
Page 34
Section 3 - Configuration The ShareCenter Pro is saving the settings. After saving the settings, the Homepage window will appear. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration Create User The Create User wizard icon directly links to the Create User function. Click the Create User icon in the Homepage window and the Create User window appears. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 36
Enter a name in User Name, and a password in Password and Confirm Password. If setting a specific storage quota for the user, tick the Set Quota check box and enter the storage quota in megabytes (MB). Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 37
Select a group list from the list. If there is no entry in the list, you can go to Account Management > User to update the information after a group has been created. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 38
Select a share folder from the list. If there is no entry in the list, you can go to Account Management > User to update the information after a share folder is created. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 39
Section 3 - Configuration This window displays the information that has been configured. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
The Create Share Folder wizard icon directly links to the Create Share Folder function. Click the Create Share Folder icon in the Homepage window and the Create Share Folder window appears. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 41
Click the radio buttons to configure the folder options. If setting a specific storage quota for the share folder, tick the Set Quota check box and enter the storage quota in megabyte (MB). Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
My Favorites field. To delete a category in My Favorites, drag the category in My Favorites field to the left window. Once the category is added to My Favorites, click the icon to see the category in the list. Click to directly link to the window of the category. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration Status This folder contains System Status, Hard Drive Status, Resource Monitor, and Connection Status. Click each folder to see the subcategories. D-Link ShareCenter Pro 1200-05 User Manual...
D i s p l a y s i n f o r m a t i o n f o r a Information connected USB printer, memory disk or UPS. Click the Unmount button to remove the device from the ShareCenter Pro. D-Link ShareCenter Pro 1200-05 User Manual...
Page 45
Details button. S.M.A.R.T. The S.M.A.R.T. test results for the selected hard drive Information is displayed. Click the Close button to go back to the Hard Drive Status window. D-Link ShareCenter Pro 1200-05 User Manual...
Status - Resource Monitor - CPU Usage The Resource Monitor screen provides detailed information on CPU Usage, Disk Usage, Memory Usage, Bandwidth Usage and Process streams. CPU Usage is illustrated in System CPU Utilization Ratio. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration Status - Resource Monitor - Disk Usage Disk Usage depicts the System Used size, Available Disk Space, and the Total Disk Space . D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration Status - Resource Monitor - Memory Usage The Memory Usage chart shows the Used Size, Available Space, and Total Space per Utilization ratio in minutes. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration Status - Resource Monitor - Bandwidth Usage The Bandwidth Usage chart shows bandwidth usage for both Ethernet Ports in KB/s. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration Status - Resource Monitor - Process Process table shows PID, User, Memory, CPU Usage, and Command data information. Scroll down to monitor each process. D-Link ShareCenter Pro 1200-05 User Manual...
Status - Connection Status Connection Status Table illustrates the current online users’ data information. It has information on Date/ Time, Server Type, IP Address, the User accessing the system, the Computer Name, and the Resources being used. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration Disk Management This folder contains the Volume, iSCSI Target, Virtual Volume and Disk Diagnostic. Click the folder to see the subcategories. D-Link ShareCenter Pro 1200-05 User Manual...
Page 53
Unlock Click to unlock an encrypted volume Encryption Click to configure the encryption settings of an encrypted volume. Auto Rebuild Click to enable or disable the auto-rebuild function. D-Link ShareCenter Pro 1200-05 User Manual...
Page 54
Tick the check box to select the corresponding hard drive to be part of volume. Spare Tick the check box to select the corresponding hard drive as a spare for the volume. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 55
Password Auto Unlock Tick the check box to automatically unlock the volume when the system starts. USB Key Tick the check box to save the password to a USB drive. Click Apply to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 56
A warning message appears before starting to create the volume. Click Yes to continue. The volume is being created. The status bar displays the percentage of completion in real time. Once the volume is created successfully, the Volume window appears. D-Link ShareCenter Pro 1200-05 User Manual...
Page 57
Spare Tick the check box to select the disk to be a spare disk. Disk Displays the configured disk number. Size Displays the size of the hard disk. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 58
Migration can only take place in the following instances: Standalone to JBOD Standalone to RAID 0/1/5/6 RAID 1 to JBOD RAID 1 to RAID 0/5, and 6 Click OK to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 59
The DNS-1200-05 then checks every volume and informs you if one or more volume(s) needs updating. The information below is an example of what takes place during and after this process. Log in to your system. D-Link ShareCenter Pro 1200-05 User Manual...
Page 60
Also make sure you backup all data first. Click Yes to update, No to cancel. D-Link ShareCenter Pro 1200-05 User Manual...
Page 61
Section 3 - Configuration Firmware Settings:Note the following details: The current firmware version number. The current firmware date. File Path, Click the Browse button to update the new firmware. Click Apply to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 62
Section 3 - Configuration Migration in progress. D-Link ShareCenter Pro 1200-05 User Manual...
Page 63
Section 3 - Configuration The Disk Management, Volume Table directory shows the migration taking place. See the Status tab for details. D-Link ShareCenter Pro 1200-05 User Manual...
Page 64
Section 3 - Configuration The migration process is complete. See the Status tab for details. D-Link ShareCenter Pro 1200-05 User Manual...
Page 65
ONLY RAID 1, 5 and RAID 6 supports volume expansion. Click the Expand button to see the following window. Click Yes to continue. Follow the instruction in the State column to expand the volume. D-Link ShareCenter Pro 1200-05 User Manual...
Page 66
Auto Unlock Tick the check box to automatically unlock the volume when the system starts. USB Key Tick the check box to save the password to a USB drive. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 67
Click the Browse button to locate the path of the password password that is saved to the local computer. from local Click the Load button to get the password from local to unlock this volume. D-Link ShareCenter Pro 1200-05 User Manual...
Page 68
Section 3 - Configuration This window displays the setting in the Mail tab. Click Mail to send the password to the administrator. This has been setup in the Email Account Settings under System Management, Email Alerts. D-Link ShareCenter Pro 1200-05 User Manual...
LUN at a time. However, it is possible that you can mount a iSCSI LUN as read-only on multiple initiators. Disk Disk Disk D-Link ShareCenter Pro 1200-05 User Manual...
Page 70
Do not connect 2 different clients to the same iSCSI LUN at the same time. This will lead to data loss and system crash. Create an iSCSI Target using the iSCSI Manager Login to your ShareCenter Pro as an administrator. Follow the instructions on the next page. D-Link ShareCenter Pro 1200-05 User Manual...
For iSCSI targets, the <port> in the address is optional; if specified, it is the TCP port on which the target is listening for connections. If the <port> is not specified, the default port 3260. Examples of addresses: 192.0.2.2 192.0.2.23:5003 [FEDC:BA98:7654:3210:FEDC:BA98:7654:3210] [1080:0:0:0:8:800:200C:417A] [3ffe:2a00:100:7031::1] [1080::8:800:200C:417A] [1080::8:800:200C:417A]:3260 [::192.0.2.5] mydisks.example.com , moredisks.example.com:5003 D-Link ShareCenter Pro 1200-05 User Manual...
The iSCSI Target should not be confused with iSCSI which is a protocol, iSCSI Target is a storage server instance. iSCSI is a dedicated network connected hard disk storage device, like the DNS-1200-05. The 1200 provides distinct iSCSI targets for numerous clients. Click Disk Management on the left pane. D-Link ShareCenter Pro 1200-05 User Manual...
Page 73
Click iSCSI Target. The right pane displays the iSCSI Manager Click the Enable iSCSI Target checkbox to enable this function. Click Enable iSNS and enter the iSNS server IP address. Click Apply to continue D-Link ShareCenter Pro 1200-05 User Manual...
Page 74
Section 3 - Configuration The program saves all configurations. D-Link ShareCenter Pro 1200-05 User Manual...
IQN is the acronym used to recognise this iSCSI Target. On the ShareCenter Pro , it will be constructed to “iqn.2010-01. com.d-link:” + the device’s hostname + “:” + enter the name here. Check the No or Yes radio button to disable or activate CHAP services Enter a name and password for CHAP services.
Page 76
‘:’ and dot ‘ . ’ . characters. Both of them can accepts English letters, numbers, and underscore ‘_’ . Note: Both CHAP name and password can accepts English letters, numbers, and underscore ‘_’ D-Link ShareCenter Pro 1200-05 User Manual...
Page 77
1. None: no map LUN to this target. You can map it later. 2. Create a New LUN: create a new LUN and map it to this iSCSI target. 3. Map Existing LUNs: map existing LUNs to this target. D-Link ShareCenter Pro 1200-05 User Manual...
Page 78
Section 3 - Configuration The newly created iSCSI Target appears in the iSCSI Target table. The connection status will show in the “Status” column. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration iSCSI Target - Editing iSCSI Targets Follow these instructions to edit an iSCSI Target. Under iSCSI Targets, click the iSCSI Target entry you wish to edit. Click Edit. D-Link ShareCenter Pro 1200-05 User Manual...
Page 80
The next window asks you to edit the iSCSI LUN Mapping. You can re-map any existing LUN to this iSCSI target. If this window doesn’t show any data, go to iSCSI LUNs to create a new one. D-Link ShareCenter Pro 1200-05 User Manual...
Page 81
Section 3 - Configuration The iSCSI Targets window returns to the table. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration iSCSI Target - Deleting iSCSI Targets Follow these instructions to delete an iSCSI Target. Select the iSCSI Target D-Link ShareCenter Pro 1200-05 User Manual...
Page 83
Section 3 - Configuration The Warning message indicates that the iSCSI Target will be deleted. The items in the iSCSI Targets table no longer exists. D-Link ShareCenter Pro 1200-05 User Manual...
Target - Details of an iSCSI Targets Follow these instructions to view details of an iSCSI Target. Select the iSCSI Target Click the Details button to show all details on the iSCSI Target. D-Link ShareCenter Pro 1200-05 User Manual...
The space will be allocated now. If you create a 50 GB LUN, then 50 GB will be immediately reserved for that LUN. (Note that the creation will also take more time because of that process). D-Link ShareCenter Pro 1200-05 User Manual...
Page 86
“Yes”, you can enter a size from 1 to the maximun free size of the volume. Otherwise, you can enter a size from 1 to the volume size. The upper bound of the possible maximun LUN size is 2043 GB. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 87
Under Enable CHAP, select Yes, if you wish to have authentication to login to the Target. Click No, if you do not want authentication. In the Name field, enter the CHAP name. In the Password field, enter the CHAP password. D-Link ShareCenter Pro 1200-05 User Manual...
Page 88
Section 3 - Configuration The new iSCSI LUN shows up in the iSCSI LUN table. D-Link ShareCenter Pro 1200-05 User Manual...
Edit an iSCSI LUN Select an iSCSI LUN. Click the edit button Change the LUN size if the LUN is in thin-provisioning settings Change the LUN Mapping settings here. Click Apply to save settings. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration View details of an iSCSI LUN Select an iSCSI LUN. Click the Details button The Details window shows the basic settings of an iSCSI LUN and its ACL settings in the ACL table. D-Link ShareCenter Pro 1200-05 User Manual...
Read Only: The initiator will grant Read access rights to the LUN. Read/Write: The initiator will grant Read and Write access rights to the LUN. Deny: The initiator will not see the LUN. Click Apply to continue D-Link ShareCenter Pro 1200-05 User Manual...
Page 92
Section 3 - Configuration A warning message appears asking you to reconnect to the initiator. Click OK to continue. The created LUN ACL will appear here. D-Link ShareCenter Pro 1200-05 User Manual...
Caution: Disconnect the iSCSI initiator from the ShareCenter Pro before editing the LUN ACL. Failure to do so can cause system problems. Follow these instructions to edit the LUN ACL. Select the LUN ACL you want to modify D-Link ShareCenter Pro 1200-05 User Manual...
Page 94
Section 3 - Configuration Select the LUN ACL entry and click the Edit button. Change the LUN access permissions on the initiator. Select either Read Only, Read/Write or Deny D-Link ShareCenter Pro 1200-05 User Manual...
Page 95
Section 3 - Configuration Press the Apply button, and the modified rule will be applied. A LUN warning message appears asking that you reconnect the initiator to apply the modified ACL. D-Link ShareCenter Pro 1200-05 User Manual...
When using the virtual volume for the first time, the volume must be formatted before mounting to the ShareCenter Pro. Connect/ Click Connect to link to a virtual volume. Click Disconnect Disconnect to terminate the connection. D-Link ShareCenter Pro 1200-05 User Manual...
Page 97
Username: Enter a username for authenticating Password: Enter a password for authenticating Under Device IP, enter the IP address of the iSCSI Target. This can either be an IPv4 or IPv6 address. Click the Search button D-Link ShareCenter Pro 1200-05 User Manual...
Page 98
Section 3 - Configuration The search utility finds the IQN location based on the IP address. Select the iSCSI Target and click Next. D-Link ShareCenter Pro 1200-05 User Manual...
Page 99
Add to this extension. Click Apply to continue. The Virtual Volume Table is populated with the new share. However, it shows the virtual volume as disconnected. Select the Virtual Volume and click the Connect button. D-Link ShareCenter Pro 1200-05 User Manual...
Page 100
Section 3 - Configuration The Status is updated to show Connected. The Virtual Volume remains inaccessable until you go to Account Management, Share Folder. D-Link ShareCenter Pro 1200-05 User Manual...
Page 101
Read the instructions and follow the procedure. Click Next to continue. Under Volume Path, enter the Path directory, a drop-down list appears of the Volumes on the NAS. Select your desired virtual volume. D-Link ShareCenter Pro 1200-05 User Manual...
Page 102
Click Next to continue. Select the User Access Rights you want to assign to this folder, All Users, or Specific Users. Click Next to continue D-Link ShareCenter Pro 1200-05 User Manual...
Page 103
Section 3 - Configuration Select the Access Rights you want to assign to this folder, Read Only, Read/Write, or Deny. Click Next to continue. The Summary window appears. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 104
Section 3 - Configuration The Share Folder updates with the new shared folder. The new Virtual Volume is now fully operational. D-Link ShareCenter Pro 1200-05 User Manual...
Click to stop a test Scan Click to scan if there are any errors or there is any corruption for the file system. Format Click to format a volume. All data on the volume will be deleted. D-Link ShareCenter Pro 1200-05 User Manual...
Page 106
Use the drop-down menu to select hour and minute of the day. Weekday Use the drop-down menu to select which day of the week. Date Use the drop-down menu to select a date. Click OK to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 107
Section 3 - Configuration Scan a Volume Click the Scan button to see this window. Select a volume and click Scan to start to check the file system. D-Link ShareCenter Pro 1200-05 User Manual...
Page 108
Click the Format button to see this window. Select a volume and click Format to format the volume. A warning message appears to double confirm if the formatting will proceed. Click Yes to proceed. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration Account Management This folder contains the Admin Password, Users, Groups and Share Folders. Click the folder to see the subcategories. D-Link ShareCenter Pro 1200-05 User Manual...
Admin Password. This window is used to change the administrator’s password. User Name Displays administrator’s user name. Password Enter the original password. Enter a new password. Password Confirm Retype the new password. Password Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Create Batch Click the button to create multiple users at one time. Search Enter the search keyword and click to search for the user. Click to clear the search field and all users’ information appears. D-Link ShareCenter Pro 1200-05 User Manual...
Page 112
Section 3 - Configuration Create a User Click the Create button to see the welcome window. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 113
Retype the password. Password Tick the Set Quota check box to limit the storage Set Quota capacity in megabyte for the user. The value of 0 means an unlimited quota size. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 114
Click First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh Click to update the group list. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 115
Click First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh Click to update the folder list. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 116
Section 3 - Configuration This window displays a summary of the configured information. Click Previous to modify the settings. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 117
Section 3 - Configuration Import Users Click the Import Users button to see the welcome window. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 118
Click this button to see the example for listing the users in the file. Overwrite Tick the check box to replace duplicate accounts. duplicate accounts Click the Browse button to locate the file. User List File Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 119
State filed, the user will not be able to go to the next window. Click Next to continue. The window displays the final results of importing users to the ShareCenter Pro. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 120
Section 3 - Configuration Create Batch Users Click the Create Batch button to see the welcome window. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 121
Tick the check box to replace duplicate accounts. duplicate Accounts Set Quota Tick the Set Quota check box to limit the storage capacity (in megabyte) for the user. The value of 0 means an unlimited quota size. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 122
Click First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh Click to update the group list. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 123
Click First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh Click to update the folder list. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 124
This window displays a summary of the configured information. Click Previous to modify the settings. Click Apply to save the settings. Depending on the amount of users, the procedure may take a few hours. D-Link ShareCenter Pro 1200-05 User Manual...
Select a group and click the button to remove the group from the list. Search Enter the search keyword and click to search for the group. Click to clear the search field and all groups’ information appears. D-Link ShareCenter Pro 1200-05 User Manual...
Page 126
Section 3 - Configuration Create a Group Click the Create button to see the welcome window. Group Name Enter a name of the group Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 127
First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh Click to update the group list. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration Shared Folders Shared Folders creates folders users can share over the network. These folders can be created, edited or deleted. Log into the system. Click Create Shared Folder D-Link ShareCenter Pro 1200-05 User Manual...
Page 129
Click Next to continue Under Volume Path, select the path by clicking once on the open field. A drop down menu appears of the drives on your NAS. Click Create to make a new folder D-Link ShareCenter Pro 1200-05 User Manual...
Page 130
Section 3 - Configuration Enter a name for your new folder and click OK. Once you have entered the volume path, select the Share Folder Option Select to enable or disable the Map Archive, or Recycle D-Link ShareCenter Pro 1200-05 User Manual...
Page 131
Select the Service you wish to incorporate onto the NAS. Choose from CFS, AFP, FTP,NFS, Web File Manager, or WebDAV. Click Enable to authenticate it or Disable to stop the service. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 132
Select Specific User to choose a user from your list or enter details of a user. Click Next to continue. Select the Access Rights of the Shared Folder. Select either Read Only, Read/Write, or Deny access. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 133
The final screen shows a summary of the configuration options just carried out. Read through the settings you have just made. Click Apply to finish the Shared Folder configuration settings. ShareCenter Pro starts to save your settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 134
Section 3 - Configuration ShareCenter Pro returns you to Accounts Management, Share Folders. The table displays the Shared Folder created with size, status, and management functions. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration Shared Folders - Editing a Shared Folder Edit a Shared Folder within ShareCenter Pro. Select the Shared Folder you wish edit. Click Edit. D-Link ShareCenter Pro 1200-05 User Manual...
Page 136
Section 3 - Configuration The Volume is selected. Edit the Share Folder Options (services) and Quota accordingly. Click Next to continue. Edit the Services manually according to your needs. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 137
Click Next to continue Now select the Permissions. The permissions can be for a local user or a local group. Select the user and select the Permission for the user Click Apply to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 138
Section 3 - Configuration ShareCenter Pro saves your configuration and returns you to the Share Folder Table. D-Link ShareCenter Pro 1200-05 User Manual...
Click the S button under Management to provide details on the Share Path. Click OK to exit. Click the P button to change the Access Rights. Select between All Users or Specific Users. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 140
Select the Access Rights for the volume. Read Only, Read/Write, or Deny. Click Apply to complete the changes. Click the C button to change CIFS services. Select between Enable (activate) or Disable (deactivate). Click Apply to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 141
Click the F button to change FTP services. Select between Enable (activate) or Disable (deactivate). Click Apply to continue. Clicking Disable changes the color of the letter to indicate that the service has been deactivated. D-Link ShareCenter Pro 1200-05 User Manual...
Page 142
For NFS settings, the configuration window allows you to Disable NFS or Create a new rule. To Create a new rule click Create. Under Create NFS Share, select the Permission level. There are two choices: Read Only & Read/Write. D-Link ShareCenter Pro 1200-05 User Manual...
Page 143
Section 3 - Configuration Under Root Squash, select to activate Root Squash or not. Enter the Host address. Click Apply. D-Link ShareCenter Pro 1200-05 User Manual...
Page 144
Section 3 - Configuration The NFS table now shows the changes made. To Edit Select the volume you wish to edit, click Edit. D-Link ShareCenter Pro 1200-05 User Manual...
Page 145
Section 3 - Configuration Users can edit the Permissions of a volume in this section. Once complete. Click Apply. Delete an NFS volume by clicking the volume. Then, click Delete. D-Link ShareCenter Pro 1200-05 User Manual...
Page 146
Click the M button to modify the Web File Manager. Select between Enable (activate) or Disable (deactivate). Click Apply to continue. Clicking Disable changes the color of the letter to indicate that the service has been deactivated. D-Link ShareCenter Pro 1200-05 User Manual...
Page 147
Click the W button to modify the WebDAV Services Select between Enable (activate) or Disable (deactivate). Click Apply to continue. Clicking Disable changes the color of the letter to indicate that the service has been deactivated. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration ISO Mounts Follow these steps to mount and save an ISO file. Log into the system. Click Accounts Management Click ISO Mount D-Link ShareCenter Pro 1200-05 User Manual...
Page 150
Click the empty field to browse to the ISO File Path. The ISO File must be located on the NAS to authenticate this procedure. The ISO file cannot be on a volume. Click the volume to extend your search. D-Link ShareCenter Pro 1200-05 User Manual...
Page 151
Section 3 - Configuration Click Next to continue Select the Service by using one of the radio buttons The choices include: CIFS, AFP, FTP, NFS, Web File Manager, and WebDAV. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 152
Under Access Rights specify the user - All Users or Specific Users. Click Next to continue Select which Access Rights you want to assign a user. Choose either Read Only or Deny. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 153
Section 3 - Configuration The final step is a summary. The summary displays the Path, Allowed Services, and Access Rights. Click Apply to accept the configuration changes or click Cancel. D-Link ShareCenter Pro 1200-05 User Manual...
Once the configuration is saved and you need to edit your settings once again, click Edit. Select the Services you want. Click Enable to activate the services. Click Disable to deactivate the Service Click Next to continue D-Link ShareCenter Pro 1200-05 User Manual...
Page 155
Section 3 - Configuration Select the User you wish to assign or edit. Click Next. Selecting a Specific User. Under Permissions, select the specific user, check the permission you want to set for this user. Click Apply D-Link ShareCenter Pro 1200-05 User Manual...
Page 156
Section 3 - Configuration Once you have clicked Apply, the screen reverts back to the ISO Mount table. D-Link ShareCenter Pro 1200-05 User Manual...
Select the ISO Mount you wish to delete Click the Delete button A warning message appears verifying if you want to delete the shared folder. Click Yes to confirm the delete instruction Click No to exit this instruction D-Link ShareCenter Pro 1200-05 User Manual...
Page 158
Section 3 - Configuration The folder is deleted and the ISO Mount directory is empty. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration System Management This folder contains the Network, Time and Date, System Settings, Power Management, Email Alerts, Firmware Upgrade, Logs, Syslog Server and Port Forwarding. Click the folder to see the subcategories D-Link ShareCenter Pro 1200-05 User Manual...
Use the drop-down menu to select the port bonding method. Available methods are Round Robin, Active Backup, XOR, Broadcast, 802.3ad, Adaptvie Transmit Load Balancing, and Adaptive Load Balancing. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 161
Ethernet frame size. Gateway Enter the gateway IP address for the ShareCenter Pro. VLAN Enable or disable the VLAN. VLAN ID Enter a VLAN ID when VLAN is enabled. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 162
Enter the main DNS address for the ShareCenter Pro. Secondary Enter the secondary DNS address for the ShareCenter Pro. Gateway Use the drop-down menu to select the LAN interface. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 163
Enter the subnet mask for the IP address. Metric Enter an integer cost metric for the route. Interface Use the drop-down menu to select the interface. Gateway Enter the forwarding or next hop IP address. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
This field is automatically populated if your router supports IPv6, otherwise get the details from your network administrator. Prefix Length Depending on IPv6 configuration. Subnet Mask Enter the subnet mask for the IP address. Default Enter the default Gateway address. Gateway D-Link ShareCenter Pro 1200-05 User Manual...
Page 165
Section 3 - Configuration DNS Server Primary DNS Enter the Primary DNS server on your network. Secondary Enter the Secondary DNS server settings on your network. Click Apply to complete the IPv6 configuration. D-Link ShareCenter Pro 1200-05 User Manual...
Page 166
Section 3 - Configuration The system updates. The IPv6 tab is populated with the new IPv6 IP address . D-Link ShareCenter Pro 1200-05 User Manual...
Click the radio button to set the time and date manually. Set from NTP Click the radio button and select a NTP server to Server synchronize the ShareCenter Pro’s time with the NTP server. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
System Overheat Toggle between Celsius and Fahrenheit and enter Temperature a temperature. Once the system temperature is over the entered temperature;, the ShareCenter Pro will automatically shut down. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Type Use the drop-down menu to select a fan speed mode. Available choices are Auto (Off/Low/High), Auto (Low/ High) and Manual (Always on High). Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 170
Click Enable to set a schedule for automatic system Power On/Off power on and off. Schedule On & Use the drop-down menus to select the time of Schedule Off system power on and off. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
This device plays the role of the master and standalone if its connected with a USB cable. If it is not connected in this way, the device will play the role as the slave. In the slave role it will monitor the UPS status through the network. Log-in to the NAS Click System Management D-Link ShareCenter Pro 1200-05 User Manual...
Page 172
Section 3 - Configuration Click Power Management Click UPS UPS has two modes, Master and Standalone From the drop-down list select Standalone D-Link ShareCenter Pro 1200-05 User Manual...
Page 173
The UPS Status provides Device Information, Manufacturer, Product, Battery Charge, and Status. Click Apply to continue The alternative is to select Master UPS mode. The Master UPS mode has three slave device IP address inputs. D-Link ShareCenter Pro 1200-05 User Manual...
Page 174
Section 3 - Configuration Enter an IP address into the field. Click Apply to submit the changes. D-Link ShareCenter Pro 1200-05 User Manual...
Page 175
Note: Configuring network UPS is not the default configuration. Ask a systems administrator to assist you with all configuration operations. This feature is ideal for SOHO and medium size businesses that use more than one UPS and NAS. Make sure your network supports network UPS alerts. D-Link ShareCenter Pro 1200-05 User Manual...
Click the Test E-Mail button to send a test e-mail. Event Alert Tick the check boxes to select the situation that Settings will cause the e-mail alert to be sent out. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
File Path Click the Browse button to locate the firmware. You must save the firmware to the local hard drive of your computer before upgrading the firmware. Click Apply to start updating the firmware. D-Link ShareCenter Pro 1200-05 User Manual...
Log Settings Click the Log Settings tab to see the following window. Log Settings Click the radio buttons to enable various situations which will be recorded in the logs. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 179
First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh Click to update the group list. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration System Management - Syslog Server Follow these steps to view the Syslog Server Log in to your NAS Click System Management D-Link ShareCenter Pro 1200-05 User Manual...
Page 181
Section 3 - Configuration Under System Management, Syslog Server, click Enable Syslog Server Click Apply D-Link ShareCenter Pro 1200-05 User Manual...
System Management - Syslog Server Rule Follow these steps to create a Syslog Server Rule Under System Management, Syslog Server, click Syslog Server Rule Click Create Under Create Syslog Server Rule, create a Rule Name Click Next D-Link ShareCenter Pro 1200-05 User Manual...
Page 183
Facility:- Auth, Crons, Daemon, FTP, Kern, LPR, Mail, News, Syslog Severity:- Debug, Information, Notice, Warning, Error, Alert, Critical, Emergency Click Next Under Log File, browse to the path where you want to save the file. Type a File Name D-Link ShareCenter Pro 1200-05 User Manual...
Page 184
Section 3 - Configuration Click Next to continue Under Log File Rotation Click Enable D-Link ShareCenter Pro 1200-05 User Manual...
Page 185
Click Rotate by Size. Enter the Maximum Log File Size in “MB” Click Rotate by Frequency. Rotation Frequency is Daily, Weekly, or Monthly Click Apply The Total Number of Log Files cannot exceed “10”. The warning message prompts you change your configuration. D-Link ShareCenter Pro 1200-05 User Manual...
Page 186
Section 3 - Configuration Enter the Log File amount Click Apply The Rule now appears in Syslog Server Rule table. D-Link ShareCenter Pro 1200-05 User Manual...
Follow these steps to edit a Syslog Server Rule Select the Server Rule you wish to edit Click Edit The Rule Name window is first. However, the Rule Name cannot be edited. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 188
Section 3 - Configuration Under Protocols and Severity, select from the options available. Select or deselect the options you want to edit Click Next Edit the Log File, the path and/or File Name. D-Link ShareCenter Pro 1200-05 User Manual...
Page 189
Section 3 - Configuration Edit the Log File Rotation according to your requirements. Click Apply The changes take effect immediately. D-Link ShareCenter Pro 1200-05 User Manual...
Follow these steps to edit a Syslog Server Rule Select the Server Rule you wish to delete Click Delete A warning message asks you to confirm your selection. Click Yes to delete the Rule Click No to cancel your configuration D-Link ShareCenter Pro 1200-05 User Manual...
Follow these steps to toggle between enabling and disabling a Syslog Server Rule Select the Server Rule you wish to enable or disable Click the Enable/Disable Rule button to toggle between the two. The Status column will indicate whether the device is enabled or disabled. D-Link ShareCenter Pro 1200-05 User Manual...
A warning message appears to notify you that the log will be deleted. Click Yes to clear the Log file Click No to make no changes Click the Download Log button to download the log D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration System Management - Port Forwarding The DNS 1200-05 offers two setup options under Port Forwarding - UPnP Router Detection and Port Forwarding. D-Link ShareCenter Pro 1200-05 User Manual...
Click System Management, Port Forwarding. The NAS software automatically searches for the UPnP router. If it cannot detect a router, the test comes back with “No UPnP router found on the network”. Click Test if you want to scan your network again. D-Link ShareCenter Pro 1200-05 User Manual...
Page 195
Section 3 - Configuration When the DNS1200-05 finds the UPnP router, it shows, “Found UPnP router on the network. D-Link ShareCenter Pro 1200-05 User Manual...
(80), or FTP Server (21), that you would like to be visible on the internet. To do this, click System Management, Port Forwarding, click the Port Forwarding button. Then click the Create button. D-Link ShareCenter Pro 1200-05 User Manual...
Page 197
Section 3 - Configuration The Port Settings Wizard will guide you through the basic Port Forwarding setup. Read the instructions and click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 198
The main difference between the two options is the Default Service Scan provides the basic DNS-1200-05 Port List whereas Custom a Port Forwarding service allows you to custom configure the Application Ports. Select the appropriate option and click Next. D-Link ShareCenter Pro 1200-05 User Manual...
Page 199
Section 3 - Configuration In Step 2, select one or many ports from the default service scans by clicking the checkbox next to the appropriate service. Click Apply to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 200
Section 3 - Configuration The final process reveals the Port Forwarding table. Make sure the checkboxes are checked to enable each service. The table provides the internal and external port information. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration Network Services This folder contains File Sharing, Dynamic DNS, SNMP and Network Discovery Services. Click the folder to see the subcategories. D-Link ShareCenter Pro 1200-05 User Manual...
Click the File Sharing icon in the Network Services window or the File Sharing link in the left window to configure the network services. File Sharing Click the File Sharing tab to see the following window. File Sharing Click the radio buttons to enable various network services. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 203
Anonymous Click Enable to allow anonymous FTP to log in. Support SSL/TLS Click Enable to only allow SSL or TLS connection Connection Only requests from the FTP clients. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 204
Etner the name of the workgroup which should be the same as the computers on the network. Realm Name Enter the AD server domain name. AD Server Enter the AD server hostname. Name Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 205
Click First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh Click to update the group list. D-Link ShareCenter Pro 1200-05 User Manual...
Page 206
Enter a remote share folder location manually, or click the Get Host Share Folder button to search for one. folder Local share Enter the local share name in the field. name Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Re-type the password or key. or Key Timeout Enter a time in hours for periodic updates from the dynamic DNS provider. Status Displays the current status to the server. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Enable or Disable SNMP. SNMP Community Enter the name of the SNMP community. Notification Enable or Disable trap support. Notification IP Enter the IP address that will receive the notification. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
UPnP discovery protocol. LLTD Click Enable to allow the ShareCenter Pro to be discovered by the network map under Windows Vista or Windows 7. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration Applications This folder contains the Web File Manager and Download Manager. Click the folder to see the subcategories. D-Link ShareCenter Pro 1200-05 User Manual...
SSL Connection Click the radio buttons to enable or disable the HTTPS connection. SSL Port Enter the port number for the HTTPS connection. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Click First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh Click to update the group list. D-Link ShareCenter Pro 1200-05 User Manual...
Page 213
URL can be connected. Save To Click the field to show the available folders. Click the Create button to add a new folder. Double-click a folder to select it. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 214
Time Use the drop-down menu to select downloading time. Weekly Select a day of the week for recurring download. Monthly Select the month for recurring download. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Section 3 - Configuration Backup This folder contains the Volume Snapshot, Local Backup, Remote Backup, External Backup, and Amazon S3. Click the folder to see the subcategories. D-Link ShareCenter Pro 1200-05 User Manual...
Take Click the button to take a snapshot of a volume. snapshot Show Click the button to show the calendar indicating on snapshot which dates a snapshot had been taken. D-Link ShareCenter Pro 1200-05 User Manual...
Page 217
Weekday Use the drop-down menu to select the day of the week. Date Use the drop-down menu to select the day of the month. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 218
Find the year and month of the snapshot on that day. The date cell is highlighted when there are snapshots on that day. Click the cell to view details of the volume’s snapshot(s). Click Close to go back to the Volume Snapshot window. D-Link ShareCenter Pro 1200-05 User Manual...
Page 219
First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh Click to update the group list. Click Close to go back to the previous window. D-Link ShareCenter Pro 1200-05 User Manual...
Click First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh Click to update the group list. D-Link ShareCenter Pro 1200-05 User Manual...
Page 221
Tick the check box to enable the incremental backup Backup method. All backups after the first full backup will be on an incremental basis. Only the changes since the last backup will be backed up. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 222
Time Use the drop-down menu to select the time for backup. Weekly Select a day of the week for recurring backup. Monthly Select the month for recurring backup. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
ShareCenter Pro. This is the remote backup password. The password for the remote NAS should be the same as the password of the ShareCenter Pro. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Page 224
Click First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Refresh Click to update the group list. D-Link ShareCenter Pro 1200-05 User Manual...
Page 225
Section 3 - Configuration Click Create to see the window. Server Type Use the drop-down menu to select between D-Link NAS Server or Rsync Server. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 226
This window allows you to configure the source settings. Job Name Enter the name of the remote backup job. Folder Path Click the field to select the source file/folder to be backed up remotely. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 227
Tick the check box to enable SSH encryption. Support Keep Existing Tick the check box to keep the existing file with File the same name at the remote server and create another copy for backup. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 228
Section 3 - Configuration This window is used to configure the destination path. Destination Path Click the field to select the destination path. Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 229
Time Use the drop-down menu to select the time for backup. Weekly Select a day of the week for recurring backup. Monthly Select the month for recurring backup. Click Apply to save the settings. D-Link ShareCenter Pro 1200-05 User Manual...
Tick the Incremental Backup check box to Mode enable the incremental backup method. All backups after first full backup will be on an incremental basis. Only the changes since the last backup will be backed up. D-Link ShareCenter Pro 1200-05 User Manual...
Create a bucket on the Amazon S3 Server where you can upload or download your ShareCenter Pro data to/from. Create an Amazon S3 Scheduled Backup on your ShareCenter Pro to automatically upload any ShareCenter Pro Network Share to the Amazon S3 service. D-Link ShareCenter Pro 1200-05 User Manual...
Log in. Click Backup, Amazon S3 Click Create The Create Amazon S3 Job wizard appears providing the following details: Job Name Settings Remote Settings Server Type Local Settings Schedule Settings Finish Click Next to continue D-Link ShareCenter Pro 1200-05 User Manual...
Page 233
Section 3 - Configuration Step 1 Enter a Job Name Click Next to continue Step 2 Remote Settings Enter the Access Key, Private Key, Remote Path and Region supplied my Amazon Click Next to continue D-Link ShareCenter Pro 1200-05 User Manual...
Page 234
Click Next to continue Step 4 Select the Local Path settings for your backup Click in the Local Path area. Your NAS drive should appear. Locate the path of your drive Click Next to continue D-Link ShareCenter Pro 1200-05 User Manual...
Page 235
A summary of the configuration just completed is displayed. This is the final step in the wizard. Click Apply to end the wizard or Previous to back and make changes. Click cancel to exit and make no changes. D-Link ShareCenter Pro 1200-05 User Manual...
Page 236
Highlighting the task you wish to delete A warning message will appear asking you if you wish to delete the task. Click Yes to delete Click No to return back to the previous page D-Link ShareCenter Pro 1200-05 User Manual...
The Language Pack allows users to add different languages to the NAS. This gives users the ability to see the interface in their own language and configure the NAS appropriately. Please Note: Currently, the Language Pack only supports the Multi-Language pack. D-Link ShareCenter Pro 1200-05 User Manual...
Click First Page ( ), Previous Page ( ), Next Page ( ) or Last page ( ) to search for the group. Page Click to update the group list. D-Link ShareCenter Pro 1200-05 User Manual...
Because the data is stored on multiple disks, fault tolerance means that if one drive fails, all data RAID 1 provides fault tolerance and protection, in in the array will be lost. addition to performance advantages. D-Link ShareCenter Pro 1200-05 User Manual...
Page 240
240GB (3x80GB). Implementing RAID 5 on the ShareCenter Pro allows it to continue operating even if one of the disks fails. The diagram below indicates the operation of RAID 5: D-Link ShareCenter Pro 1200-05 User Manual...
Page 241
RAID 6 is an extension of RAID 5. It adds an additional parity block by using block-level striping with two parity blocks distributed RAID 6 across all the member disks. RAID 6 allows the array to continue operating even if two of the disks fail. The diagram below indicates the operation of RAID 6: D-Link ShareCenter Pro 1200-05 User Manual...
Section 4 - Knowledge Base Mapping a Drive You can use the D-Link Easy Search Utility to map drives to your computer. Insert the ShareCenter Pro CD into your CD-ROM drive. Click Easy Search Utility. The Easy Search Utility will load and detect any ShareCenter Pro devices that are on the local network.
Page 243
Available volumes will be displayed under Drive Mapping. Highlight the volume you want to map. Select an available drive letter from the drop-down menu and click Connect. Once connected, your mapped drive(s) will appear in My Computer. D-Link ShareCenter Pro 1200-05 User Manual...
Page 244
Section 4 - Knowledge Base Double-click the My Computer icon on your desktop. Double-click the mapped drive to access the files and folders. D-Link ShareCenter Pro 1200-05 User Manual...
Note: The print function is supported in Microsoft Windows OS only. The device does not support the copy and scan functions of Multi-Function Printers either. To add a printer: Click Start and select Printers and Faxes. D-Link ShareCenter Pro 1200-05 User Manual...
Page 246
Section 4 - Knowledge Base Select Add a printer. The Windows Add Printer Wizard will launch: ® Click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 247
When prompted to choose a local, or network printer, select “A network printer, or a printer attached to another computer.” Click Next to continue. Select “Browse for a printer” and click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 248
Section 4 - Knowledge Base Select Double-click DNS-1200 from the Shared Printers list to expand the tree. Select the available USB printer, and click Next to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 249
Click OK to continue and select a printer driver. Select the appropriate printer driver from the list and click OK to complete the wizard. If the driver is not in the list, select Have Disk. D-Link ShareCenter Pro 1200-05 User Manual...
Page 250
Section 4 - Knowledge Base Insert the print driver CD or browse to the appropriate directory. Select the appropriate driver file, and click Open to continue. Click OK to continue. D-Link ShareCenter Pro 1200-05 User Manual...
Page 251
Section 4 - Knowledge Base Verify the driver is correct, and click OK to continue. The wizard will install the printer drivers, and return a completion screen. Click Finish. D-Link ShareCenter Pro 1200-05 User Manual...
Page 252
Section 4 - Knowledge Base The printer should now appear as an available printer. D-Link ShareCenter Pro 1200-05 User Manual...
If you cannot see the latest list, click the Refresh button to update the status. Note: You will need to create iSCSI volume in the Disk Management -> iSCSI Target. Click the iSCSI Targets tab to see the iSCSI target name in this section. D-Link ShareCenter Pro 1200-05 User Manual...
Page 254
Target. If CHAP authentication has been enabled, then a username and password will be required. Management Click the button to see the Management window. The window allows you to add, delete, mount and unmount the partition. D-Link ShareCenter Pro 1200-05 User Manual...
Page 255
1. When attempting to connect a target for the first time, choose the target from the list 2. Click the Connect button. 3. If the CHAP is enabled, you will see this window appears requesting CHAP User and Password. D-Link ShareCenter Pro 1200-05 User Manual...
Page 256
Choose the drive letter that you want to allocate to the iSCSI partition from the drop-down menu. When you have finished configuring the Target Settings, click the Format button to see the window below D-Link ShareCenter Pro 1200-05 User Manual...
Page 257
File System Displays the File System that the partition was formatted with. Capacity Displays the total capacity of the partition. Target Displays the iSCSI target name of the partition. D-Link ShareCenter Pro 1200-05 User Manual...
Page 258
Choose the drive letter that you want to allocate to the iSCSI partition from the drop-down menu. When you have finished configuring the partition settings, click the Format button to add the new partition. D-Link ShareCenter Pro 1200-05 User Manual...
Page 259
Section 4 - Knowledge Base Deleting an existing partition Right-click an existing partition and click Delete. D-Link ShareCenter Pro 1200-05 User Manual...
Page 260
Carry out the following steps to mount a disk: 1. Right-click an unmounted partition and click Mount. The Drive Select window appears. 2. Select the drive letter in the Device drop-down list. 3. Click the OK button. D-Link ShareCenter Pro 1200-05 User Manual...
Page 261
4. The mounted disk is displayed in the Disk Management list. 3. The newly mounted disk is displayed in the My Computer window and can be used as if it was a locally attached disk. D-Link ShareCenter Pro 1200-05 User Manual...
Disk(s) column. Hot swap one of the hard drives, make sure the Disk number has disappeared from the Disk(s) column, and then hot swap the next hard drive. D-Link ShareCenter Pro 1200-05 User Manual...
Section 4 - Knowledge Base Storing non-English Character Files By default the ShareCenter Pro will support Unicode which is an industry standard allowing computers to consistently represent and manipulate text expressed in most of the world’s writing formats. D-Link ShareCenter Pro 1200-05 User Manual...
• Hardware Revision (located on the label on the bottom of the network camera (e.g. rev A1)). • Serial Number (s/n number located on the label on the bottom of the network camera). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.
Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
Page 266
D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s...
Page 267
D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link.
Page 268
FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT.
Page 269
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. D-Link ShareCenter Pro 1200-05 User Manual...
Appendix C - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.2 October 19, 2012 D-Link ShareCenter Pro 1200-05 User Manual...