Cd Operation; Basic Playback; To Pause Play; To Stop Play - LG LPC-140A Owner's Manual

CD Operation

FUNCTION SWITCH

Basic Playback

Set FUNCTION SWITCH to CD.
1 1
Press CD DOOR OPEN ( Z OPEN) button to
2 2
open the disc compartment.
Load a disc with the printed side facing up.
3 3
Close the disc compartment. The display will
4 4
show the total number of tracks.
Press CD PLAY/PAUSE (
5 5
play.
The track number will be shown in the

To Pause Play

Press CD PLAY/PAUSE (u) button to pause during
playback.
Press CD PLAY/PAUSE (u) button again to resume
play.

To Stop Play

Press CD STOP (x) button during playback.

To Skipping the Track

• Press CD FORWARD SKIP/SEARCH (
to go to the next track.
• When CD BACKWARD SKIP/SEARCH (
button is pressed once midway through a track,
the player returns to the start of that track. When
it is pressed again, a track is skipped each time
the button is pressed.
u ) button to begin
display.
> ) button
. )
CD DOOR OPEN
• CD BACKWARD SKIP/SEARCH (
• CD FORWARD SKIP/SEARCH (
• CD REPEAT
• CD STOP ( x )
• CD PLAY/PAUSE (

To Searching the Track

After pressing and holding CD SKIP/SEARCH
( . , > ) button during playback, then release at
the point you want.
Notes
• Do not tilt or move your unit with discs loaded. If you
do you may damage the discs and your unit.
• Do not touch the playing side of CD; the side without
any printing on it.
• Clean your CD from the middle outward with a soft
lint free cloth.

To Repeat Play

To play one track repeatedly
Press CD REPEAT button once during playback.
- "REPEAT 1" appears in the display.
To play all tracks repeatedly
Press CD REPEAT button again during playback.
- "REPEAT ALL" appears in the display.
To cancel repeat play
Press CD REPEAT button once more during playback.
- Repeat indicator disappears.
(ZOPEN)
. )
> )
u )
9