Panasonic SC-NE5 Wi-Fi Connection Manual

VQC9399
Wi-Fi ® connection guide
You can wirelessly stream music from an iOS device, an Android
Mac/PC to SC-NE5/SC-NE3's speakers. To use this music-streaming feature,
SC-NE5/SC-NE3 must join the same 2.4 GHz wireless network as the compatible
device through the wireless network router (access point).
*1 Wireless network
iOS device , Android device
or Mac/PC
*1: Refer to the Operating Instructions for the compatibility.
Screen images used in this sheet : iPhone 4S, iOS 6.0.1
WPS button method Using the iPod dock
1 The following explanations are based on an iPhone.
Press and hold [s WPS] on
1
the speaker unit for more than
3 seconds.
2
3
Blinks in blue
2
Press the WPS button on the
wireless network router.
Lightning connector compatible iPod
touch/iPhone:
* 2
The settings are completed when
"SUCCESS" is displayed and indicator
lights in blue.
iPod touch/iPhone/iPad with
iOS 5.0 or later:
Lights in blue
*2 : The marking may differ.
3
Press [OK] on the remote
control to exit.

Using AirPlay

The following explanations are based on an
iPhone.
Preparation
≥Turn this system on.
All manuals and user guides at all-guides.com
Wireless Speaker System
Model No. SC-NE5
SC-NE3
TM
device or a
SC-NE5/
router SC-NE3
(SC-NE5 only)
4
Disconnect any devices Unlock your iPhone and then
connected to the CD unit. press and hold
[sNETWORK SETUP] on the
Connect the iPhone to your
CD unit for more than 3
home wireless network.
seconds.
Connect the iPhone to the CD
unit.
Choose one of the following
connections.
5
A message will pop-up on the
iPhone. Allow the iPhone to
share the wireless network
settings.
6
The settings are completed
when "SUCCESS" is displayed
and the indicator on the
speaker unit lights in blue.
7
Press [OK] on the remote
control to exit.
Dedicated cable supplied with the
iOS
device
1
Connect the iPhone to your home wireless network.
"Settings"
*3 : You may be prompted for the password. Enter the password of your home wireless network.
2
Select "Panasonic NE5 (NE3) _ _ _ _ _ _" from the AirPlay
"Music"
Start wireless network settings
Preparation
1 Place SC-NE5/SC-NE3 close to the wireless network router.
2 Turn this system on.
3 Follow the chart below to choose the network setting method.
≥ If you want to perform wireless setting with your Mac/PC, or you want to apply the advanced
setting, refer to [SC-NE5] "Method 4"
Does your wireless network router support
WPS (Wi-Fi Protected Setup
Yes
Are you using an iPod touch/iPhone/iPad?
Is the iOS version 5.0 or later?
Yes
Using the smartphone app
You can make the wireless
network settings with the app,
"Panasonic Stereo System
Network Setup" (for free).
If you're using an Android device,
download the app at the Google
TM
Play Store. If you're using an
iPod touch/iPhone/iPad,
download it at the App Store.
Preparation
≥Connect your smartphone to
your home wireless network.
≥Check the password for your
home wireless network.
1
Press [SETUP] on the remote
control repeatedly to select
"NET SETUP" and then press
[OK].
2
Start "Panasonic Stereo
System Network Setup" on
your smartphone and follow
the indications.
Turn on
"Wi-Fi"
icon and start play.
"Panasonic NE5 (NE3) _ _ _ _ _ _"
or [SC-NE3] "Method 3" in the operating instructions.
TM
)?
No / Do not know
Which model do you use?
SC-NE5 SC-NE3
No
∫ Note for the iOS version
After step 2
1 Enter the password for the home
wireless network to which the iOS
device is connected.
2 When a message instructing you
to connect the iOS device to this
system is displayed, press the
home button to close the app.
3 On the Wi-Fi network selection
screen in "Settings", select
"00 Setup _ _ _ _ _ _".
4 When a message indicating the
completion of the connection to
this system is displayed, restart
the app.
5 When a message indicating the
completion of the Wi-Fi setup of
this system is displayed, close the
app, and then check the operation
of AirPlay, etc.
Your home wireless
network name
(SSID)*3
Play starts.
(with a slight delay)