4. To sanitize the unit:
a)
It is advisable that the machine
be sanitized using a store-bought
disinfectant. Follow instructions for
disinfectant use.
b)
After using disinfectant, clean the unit
with water (see cleaning and maintenance).
It is recommend that this should be done
every three months.
5.
To remove mineral deposits(Descale):
Mix 1 gallon of water with 0.25kg citric acid
a)
to be descale solution in the bottle, then
follow the step 1-3 of "using your water dispenser"
on page 7, Make sure the water can
flow out from the hot water spout
when the hot water button be activated.
b)
Turn on the heating switch to heat water.
c) 30 minutes later, drain off the liquid and
clean it with water two or three times.
It is recommend that this should be done
every six months.
6.
Never disassemble this machine by
yourself to avoid risk of damage.
11
Fig. 17